Installing new rear bumper
#1
Burning Brakes
Thread Starter
Installing new rear bumper
I've never done any body work before. Any tips before I get started? Please include taking off old bumper and replacing. Thanks.
#2
Melting Slicks
Member Since: Oct 2002
Location: Manalapan FL
Posts: 3,255
Likes: 0
Received 0 Likes
on
0 Posts
Re: Installing new rear bumper (scottw)
Do a search in the archive section. There are many, many posts on this very issue.
I just replaced my rear bumper with an Eckler's "Tru-Flex". Cut the rear bumper off with tin snips and snapped off most of the original retainers.
Used Eckler's multi-piece retainers to replace. Will have body shop do final fitment/painting.
Good luck,
D. Ocean
Miami, FLA
[Modified by 74FLCONV, 8:38 PM 2/3/2003]
I just replaced my rear bumper with an Eckler's "Tru-Flex". Cut the rear bumper off with tin snips and snapped off most of the original retainers.
Used Eckler's multi-piece retainers to replace. Will have body shop do final fitment/painting.
Good luck,
D. Ocean
Miami, FLA
[Modified by 74FLCONV, 8:38 PM 2/3/2003]