350 punched to 383
01-31-2003, 06:13 AM
#3
Drifting
Member Since: Sep 2000
Location: Germantown Maryland
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
Re: 350 punched to 383 (Turbo-Jet)
-400 cast crank with journals ground down
-400 5.565 rods for standard height 4.030 pistions
:cheers:
-400 5.565 rods for standard height 4.030 pistions
:cheers:
01-31-2003, 01:01 PM
#6
Race Director
Member Since: Apr 2000
Location: Galloway NJ
Posts: 11,840
Likes: 0
Received 0 Likes
on
0 Posts
01-31-2003, 04:14 PM
#7
Le Mans Master
Re: 350 punched to 383 (Metal_Wulf)
At least use the 5.7" rods. I bought a 383, 4 bolt, forged piston, 5.7 rod fully assembled short block, completely balanced from http://www.wmsonline.com for $1670. That inculded shipping and taxes. It's a great motor
[Modified by Paul 75 L82, 4:19 PM 1/31/2003]
[Modified by Paul 75 L82, 4:20 PM 1/31/2003]
[Modified by Paul 75 L82, 4:24 PM 1/31/2003]
[Modified by Paul 75 L82, 4:19 PM 1/31/2003]
[Modified by Paul 75 L82, 4:20 PM 1/31/2003]
[Modified by Paul 75 L82, 4:24 PM 1/31/2003]