Anybody tried Hoosier radials on their C-3?
#1
Melting Slicks
Thread Starter
Anybody tried Hoosier radials on their C-3?
I just put new P295's on the rear,after not being able to find anything bigger,and what do you know,Hoosier has bigger! They have a street rod seriies radial that starts with a 29x12.50-15 and goes up from there. This tire measures 28.6 diameter,13.0 section width,and 10.0 at the tread. The P295's seem a bit short,measuring 26.7 diameter,12.15 section width,and 10.05 tread.Looks like a sweet fit,but I was wondering if anyone's tried them. They're a bit pricy at $220 a piece.
[Modified by The Money Pit, 10:23 PM 1/27/2003]
[Modified by The Money Pit, 10:23 PM 1/27/2003]
#3
Team Owner
Re: Anybody tried Hoosier radials on their C-3? (QuickVet)
where did you see this tire :confused:
:cheers:
Olivier
[Modified by GrandSportC3, 5:10 PM 1/27/2003]
#4
Team Owner
Re: Anybody tried Hoosier radials on their C-3? (GrandSportC3)
where did you see this tire :confused:
Summit has them. I was already thinking in getting a set of those... (Quick Time)
:cheers:
Olivier
Summit has them. I was already thinking in getting a set of those... (Quick Time)
:cheers:
Olivier
:cheers:
Olivier
#5
Melting Slicks
Thread Starter
Re: Anybody tried Hoosier radials on their C-3? (GrandSportC3)
Cech them bad boys out! Go to the Pro Street section.http://www.hoosierracingtire.com/streetframeset.htm
[Modified by The Money Pit, 10:24 PM 1/27/2003]
[Modified by The Money Pit, 10:24 PM 1/27/2003]
#6
Team Owner
Re: Anybody tried Hoosier radials on their C-3? (The Money Pit)
They seem to be great tires...
:cheers:
Olivier
:cheers:
Olivier
#7
Le Mans Master
Re: Anybody tried Hoosier radials on their C-3? (GrandSportC3)
X-otic(mark) used to run them on his 76 vette and 68 camaro,had soft tread,but hooked up nice.oops sorry not radials
[Modified by patsnitrovette, 6:43 PM 1/27/2003]
[Modified by patsnitrovette, 6:43 PM 1/27/2003]