Spall install this weekend...which thermostat?
#1
Safety Car
Thread Starter
Spall install this weekend...which thermostat?
Gonna install the Spals this weekend (if the UPS website tracking is right and they are delivered today). Was thinking about changing the coolant and thermostat during the install. Which temp thermostat should I use with the Spals? I'm getting the standard 195* Spal thermo switch.
Brett :thumbs:
#2
Melting Slicks
Re: Spall install this weekend...which thermostat? (Brettmc)
I ordered the same setup this week and I plan to use a 185 degree thermostat. It make sense to me to have it in the middle of the fan thermoswitch range. I would be interested in hearing other theories. Perhaps Tom Dewitt would share his experiences and have a better recommendation.
Paul
Paul
#3
Safety Car
Thread Starter
Re: Spall install this weekend...which thermostat? (pws69)
I was thinking it might be better to have the thermostat opening below the fan cut-off point. That way, the thermostat never closes. It will be interesting to hear other viewpoints.
[Modified by Brettmc, 1:12 PM 1/24/2003]
[Modified by Brettmc, 1:12 PM 1/24/2003]
#4
Le Mans Master
Re: Spall install this weekend...which thermostat? (Brettmc)
I use a Robert Shaw high flow thermostat, 180 degrees. The fans turn on and off when sitting or in town traffic. On the highway, they never come on. I was using a cheapo generic Stant and it restricted flow enough that the coolant never got cool enough for the fans to shut off once they came on.
Cost me about $10 at AutoZone.
Cost me about $10 at AutoZone.
#6
Re: Spall install this weekend...which thermostat? (Brettmc)
I got the 185 for mine. But, the weather is so cold here, I can't get a good feel for the on and off times. But, she is staying WAYYYYYY COOOOOL.
Des
Des