Took some new pictures of the car today
#1
Safety Car
Thread Starter
Took some new pictures of the car today
It's been over a year since I've taken pictures of the whole car. I snagged some of these into my sig.
These are some Hi-res shots.
http://members.aol.com/yellow69shark...Vette11901.JPG
http://members.aol.com/yellow69shark...Vette11902.JPG
http://members.aol.com/yellow69shark...Vette11903.JPG
http://members.aol.com/yellow69shark...Vette11904.JPG
These are some Hi-res shots.
http://members.aol.com/yellow69shark...Vette11901.JPG
http://members.aol.com/yellow69shark...Vette11902.JPG
http://members.aol.com/yellow69shark...Vette11903.JPG
http://members.aol.com/yellow69shark...Vette11904.JPG
#2
Team Owner
Member Since: Dec 1999
Location: Florida
Posts: 26,485
Received 258 Likes
on
172 Posts
2021 C2 of the Year Finalist - Modified
C2 of the Year Finalist - Modified 2020
C2 of Year Finalist (performance mods) 2019
St. Jude Donor 03-'04-'05-'06-'07-'08-'09-10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20-'21-'22-'23-'24
Re: Took some new pictures of the car today (Steve Straus)
Very nice! :)
[Modified by OHSIXX, 1:34 PM 1/19/2003]
[Modified by OHSIXX, 1:34 PM 1/19/2003]
#3
Safety Car
Re: Took some new pictures of the car today (Steve Straus)
Very nice, What intake is that.
#4
Safety Car
Thread Starter
Re: Took some new pictures of the car today (69 N.O.X. RATT)
Very nice, What intake is that.
#5
Safety Car
Re: Took some new pictures of the car today (Steve Straus)
[QUOTE]Very nice, What intake is that.
It's an older Edelbrock Victor Jr 2-R with the twisted carb mount.
I have one of those old twist mount Torker 2-0's laying around in the garage. I always thought that was a pretty good design, seemed like it could even things out going into the runners.
Have you tried to fit a L-88 hood over that. I have a L-88 hood and I am going to a Victor Jr. Mine will not fit under my hood and allow enough air to the motor, that is with a drop base and Extreme top. I am going to cut the hood and raise it 2" still trying to retain the L-88 hood look. I will also fabricate a big air box to totally encapcilate the air cleaner.
It's an older Edelbrock Victor Jr 2-R with the twisted carb mount.
I have one of those old twist mount Torker 2-0's laying around in the garage. I always thought that was a pretty good design, seemed like it could even things out going into the runners.
Have you tried to fit a L-88 hood over that. I have a L-88 hood and I am going to a Victor Jr. Mine will not fit under my hood and allow enough air to the motor, that is with a drop base and Extreme top. I am going to cut the hood and raise it 2" still trying to retain the L-88 hood look. I will also fabricate a big air box to totally encapcilate the air cleaner.
#6
Safety Car
Thread Starter
Re: Took some new pictures of the car today (69 N.O.X. RATT)
I have one of those old twist mount Torker 2-0's laying around in the garage. I always thought that was a pretty good design, seemed like it could even things out going into the runners.
Have you tried to fit a L-88 hood over that. I have a L-88 hood and I am going to a Victor Jr. Mine will not fit under my hood and allow enough air to the motor, that is with a drop base and Extreme top. I am going to cut the hood and raise it 2" still trying to retain the L-88 hood look. I will also fabricate a big air box to totally encapcilate the air cleaner.
I don't think they make this intake anymore.
#12
Le Mans Master
Re: Took some new pictures of the car today (Steve Straus)
Very nice photos! And not a bad car either. ;)
#13
Safety Car
Thread Starter
Re: Took some new pictures of the car today (Clink69)
Looks great Steve, Those Sidepipes are :cool: to , are they aluminized?
#15
Safety Car
Member Since: Nov 1999
Location: Paducah KY
Posts: 4,466
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
St. Jude Donor '03
Re: Took some new pictures of the car today (Steve Straus)
:cool: Nice, gonna look awesome with the hood on. :cheers: