Paul L

Yes this is the intake that I experimented with. There was a crack between the secondary bores. That has been fixed with JB Weld as you can see. And polished. It looks pretty solid to me but some members have expressed doubts. I tend to lean in that direction. But others have said JB Weld is just fine. So rather than discard this intake manifold I am offering it for free. I do have to recoup costs of about $25.00US for shipping but that is it.

If anyone wants it let me know why. I would not wish to see it on EBay in the future as an original 1979 etc. Do let me know by e-mail if you wish. I need a persuasive argument.




http://temp.corvetteforum.net/c3/pau...kegone_009.jpg


[Modified by paul79, 9:07 PM 12/29/2002]


[Modified by paul79, 9:12 PM 12/29/2002]


[Modified by paul79, 9:19 PM 12/29/2002]

Titanium Rat

[quote]If anyone wants it let me know why. I would not wish to see it on EBay in the future as an original 1979 etc. Do let me know by e-mail if you wish. I need a persuasive argument.
------------------
darn, i was going to get it from you, tig it up then list it on ebay as a 79 tiged/welded aluminum manifold