ANYONE INTERESTED IN A COMPLETE 502.......CHEAP?
#1
Race Director
Thread Starter
Member Since: Feb 1999
Location: In Dreams There Is Truth Ohio
Posts: 16,975
Likes: 0
Received 5 Likes
on
5 Posts
ANYONE INTERESTED IN A COMPLETE 502.......CHEAP?
Machine shop has a complete 502, from the pan to the intake, no carb, no distributor, he wants around 4800. Freshly rebuilt.
#4
Race Director
Thread Starter
Member Since: Feb 1999
Location: In Dreams There Is Truth Ohio
Posts: 16,975
Likes: 0
Received 5 Likes
on
5 Posts
Re: ANYONE INTERESTED IN A COMPLETE 502.......CHEAP? (GDaina)
specs on the 502:
.010 on the mains
hyd roller, 246 @.050, .575 lift, 110 centerline
Std. bore, forged pistons, .075 dome, comp ratio 9.5
Steel sq port heads, 3 angle grind, assume combustion chambers are 118 CC
Aluminum hi rise intake
dimple rods, 7/16" bolts
flex plate, chevelle road racing oil pan
.010 on the mains
hyd roller, 246 @.050, .575 lift, 110 centerline
Std. bore, forged pistons, .075 dome, comp ratio 9.5
Steel sq port heads, 3 angle grind, assume combustion chambers are 118 CC
Aluminum hi rise intake
dimple rods, 7/16" bolts
flex plate, chevelle road racing oil pan
#5
Race Director
Member Since: Jun 2001
Location: The Only Corvette in Gila Bend, Az.
Posts: 16,483
Likes: 0
Received 1 Like
on
1 Post
St. Jude Donor '09
Re: ANYONE INTERESTED IN A COMPLETE 502.......CHEAP? (GDaina)
I was ready to say sold, But no way in heck would I put that thing in my Vette with a chevelle oil pan on it... :lol: :lol: :lol:
Sounds like a nice set up George. :cheers:
Sounds like a nice set up George. :cheers: