[Houston] Where to find Spicers?
12-22-2002, 02:09 PM
#1
Melting Slicks
Thread Starter
Member Since: Nov 2001
Location: Katy (Houston) TX
Posts: 2,659
Likes: 0
Received 7 Likes
on
5 Posts
CI 7-8 Veteran
[Houston] Where to find Spicers?
Anybody in Houston know of a drivline or truck shop that I can find some Spicer u-joints?
Also looking for a good shop to flush, inspect, and possibly repair my aluminum radiator.
[Modified by tshort, 1:10 PM 12/22/2002]
Also looking for a good shop to flush, inspect, and possibly repair my aluminum radiator.
[Modified by tshort, 1:10 PM 12/22/2002]
12-22-2002, 10:21 PM
#2
Re: [Houston] Where to find Spicers? (tshort)
Travis,
Call Northwest Drivetrain on FM529. Don't have their number here at home, but they are in the book. They have Spicer components, and their installation and balancing prices have been reasonable each time I've used them (Jeep Cherokee, Chevy Suburban, All Corvette shafts).
Don't know of a radiator shop offhand, try posting at http://www.houstonc3.homeip.net/forum/
The Houston C3 Forum. I'm sure one or more of those guys has used a shop or two.
Jeff
Call Northwest Drivetrain on FM529. Don't have their number here at home, but they are in the book. They have Spicer components, and their installation and balancing prices have been reasonable each time I've used them (Jeep Cherokee, Chevy Suburban, All Corvette shafts).
Don't know of a radiator shop offhand, try posting at http://www.houstonc3.homeip.net/forum/
The Houston C3 Forum. I'm sure one or more of those guys has used a shop or two.
Jeff
12-22-2002, 10:23 PM
#3
Instructor
Member Since: Feb 2000
Location: Snohomish, WA. USA
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Re: [Houston] Where to find Spicers? (tshort)
Why are you stuck on Spicer. I have used and have heard of numerous others that have used Brute Force U-Joints with great satisfaction.
12-22-2002, 10:36 PM
#4
Team Owner
Re: [Houston] Where to find Spicers? (vette69)
Why are you stuck on Spicer. I have used and have heard of numerous others that have used Brute Force U-Joints with great satisfaction.
:cheers:
Olivier
12-24-2002, 03:12 AM
#6
Race Director
Member Since: Jan 2000
Location: Corsicana, Tx
Posts: 12,614
Received 1,875 Likes
on
913 Posts
2020 C2 of the Year - Modified Winner
2020 Corvette of the Year (performance mods)
C2 of Year Winner (performance mods) 2019
2017 C2 of Year Finalist
Re: [Houston] Where to find Spicers? (tshort)
I use Northwest Drivetrain too. Ask for Gary.
They just did my 3.5"x .134 halfshafts with 1480 series Spicer solid u-joints for my Dana 60 IRS coversion. Great folks!
JIM
They just did my 3.5"x .134 halfshafts with 1480 series Spicer solid u-joints for my Dana 60 IRS coversion. Great folks!
JIM
