An other ex Bubba job rectified.
#1
Melting Slicks
Thread Starter
Member Since: Feb 2001
Location: Europe , Luxembourg
Posts: 3,304
Likes: 0
Received 3 Likes
on
3 Posts
An other ex Bubba job rectified.
Hi
Last winter, during cosmetical work on my 68 big block convertible, I noticed that the front chrome bumper R/H brace was missing !
The bumper was just bolted to the fiberglass front. This was obviously due to a front crash and Bubba didn't think that replacing this structural member was necessary. It was not forgotten as the wheel well hole was plugged with a thin piece of sheet metal, shown in the first pic.
It cost me 60 $ from ZIP for a new part + my time.
Lots of more Bubba jobs to be found and fixed !
First pic as it was, second pic as it is now.
Gunther :seeya
[Modified by WESCH, 3:34 PM 2/27/2002]
[Modified by WESCH, 3:36 PM 2/27/2002]
Last winter, during cosmetical work on my 68 big block convertible, I noticed that the front chrome bumper R/H brace was missing !
The bumper was just bolted to the fiberglass front. This was obviously due to a front crash and Bubba didn't think that replacing this structural member was necessary. It was not forgotten as the wheel well hole was plugged with a thin piece of sheet metal, shown in the first pic.
It cost me 60 $ from ZIP for a new part + my time.
Lots of more Bubba jobs to be found and fixed !
First pic as it was, second pic as it is now.
Gunther :seeya
[Modified by WESCH, 3:34 PM 2/27/2002]
[Modified by WESCH, 3:36 PM 2/27/2002]
#3
Race Director
Re: An other ex Bubba job rectified. (Smokehouse69)
I`ll have to go look at mine and see if mine even has these brackets. I am rebuilding the front suspension and can`t remember seeing these things.
#4
Burning Brakes
Member Since: Oct 2001
Location: New Wilmington PA
Posts: 1,185
Likes: 0
Received 0 Likes
on
0 Posts
Re: An other ex Bubba job rectified. (WESCH)
Great work Gunther. Score another for the good guys. :yesnod:
I'm learning about Bubba and my car too. :rolleyes:
I'm learning about Bubba and my car too. :rolleyes: