I have a few questions (on engine mods)
#1
I have a few questions (on engine mods)
What are the best things to do to an engine to boost performance?
My dad has a cam swap planned but I will want more power when I get the car, so I want to know the best things to do to an engine to boost performace.
Thanks in advance.
My dad has a cam swap planned but I will want more power when I get the car, so I want to know the best things to do to an engine to boost performace.
Thanks in advance.
#5
Burning Brakes
Member Since: Nov 2001
Location: Toronto Ontario
Posts: 787
Likes: 0
Received 0 Likes
on
0 Posts
Re: I have a few questions (Mikes80L48)
Don't mess with the engine unless you have years of experince, or will will have nothing but problems and wasted your money. The best thing to do is go to a speed shop you can trust and ask them to sell you a complete kit frome one manufature a "matched set" designed for your engine or simply buy a turn key crate engine this may be the cheapest in the long run.
#6
Race Director
Member Since: Apr 1999
Location: CORVETTE 77 385 C.I. TEXAS
Posts: 11,520
Likes: 0
Received 12 Likes
on
12 Posts
Re: I have a few questions (Mikes80L48)
Mike
No problem to increase power!
Ex.- http://www.corvettefaq.com/c3/ganeyexhaust.htm
Dynomax coated headers, 2 1/2 duals, crossover, Dynomax mufflers.
Performer or Weiand intake.
W/ 3.08/auto XE256 for more off the line low end.
Heads- Dart Iron Eagle.
:cool:
No problem to increase power!
Ex.- http://www.corvettefaq.com/c3/ganeyexhaust.htm
Dynomax coated headers, 2 1/2 duals, crossover, Dynomax mufflers.
Performer or Weiand intake.
W/ 3.08/auto XE256 for more off the line low end.
Heads- Dart Iron Eagle.
:cool:
#7
Re: I have a few questions (Ganey)
Mike,
Ganey gave you some good advice there.
Build that engine with your Father.Then enjoy your creation!
IMO Crate motors need to be pulled apart to be checked-Ask around about the ZZ4's ect that have checked out of service early
Ganey gave you some good advice there.
Build that engine with your Father.Then enjoy your creation!
IMO Crate motors need to be pulled apart to be checked-Ask around about the ZZ4's ect that have checked out of service early