Aaron-74

Well, I'm getting VERY close to the end of all my motor things right now. So, I got on Desk Top dyno just to see what I SHOULD be expecting, just in the margine of the power I'll be making and this it what she had to say..
HP TQ
2000-144-379
2500-187-394
3000-227-398
3500-265-398
4000-300-395
4500-329-384
5000-347-364
5500-348-364--(redline of the cam is @5600)
6000-334-292

Hopefully I can put a mid 13.7 or so..to a 14.2

After a 3.55 rear and a XE-270-H and 2500stall I would like to be in the low 13's. But that's next years project after then interior and paint..you love to hate these ol' stingrays. But all is redeamed on that 1st trip to the gas station.

:chevy

rayray

I have Dyno 2000 also, my question is that I have a problem picking which head to choose. I'm using trick flow heads, so which should I pick? I also would like to calculate my engine with a closed chamber head (041 casting), but don't know what to put in the head section of dyno 2000. :confused: :confused: :confused: :confused:

Aaron-74

We've pretty much got every Air-Flow file for each head out there, or atleast pretty closed. I could Email you the files for them. I don't have the 041 head castings. But we've got a lot of others.

rayray

If you would send me the file, thanks Ray. http://www.headhunterz@worldnet.att.net

Aaron-74

Do you want all the head files? Or just select heads?

rayray

If it's not too much of a problem all of them, if so let me know which one's you have and I'll let you know the one's I would like. Thanks Ray.