HEADER CHOICES
#1
Racer
Thread Starter
HEADER CHOICES
Apparently the 3 choices are Dynomax, Hedman, & Hooker.
Do all 3 manufacturers use the same thickness flange. I think this could be an important consideration to prevent leakage.
Do all 3 manufacturers use the same thickness flange. I think this could be an important consideration to prevent leakage.
#3
Burning Brakes
Member Since: Aug 2001
Location: Bay City MI.
Posts: 1,002
Likes: 0
Received 0 Likes
on
0 Posts
Re: HEADER CHOICES (Ken74Conv)
I was looking at Hookers for my big block, but was told the jet coating was not so good. I got on to Sanderson headers and they make an awesome product and they are made in the USA!!!! They are block hugger style with 16 gage tubes and 3" collector. Good people to talk to and very helpfull. My BB5 headers cost $435 with the Jet hot coating on, check them out! http://www.sandersonheaders.com Good luck!
#4
Burning Brakes
Member Since: Apr 2001
Location: East Providence RI
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
Re: HEADER CHOICES (467-Ratman)
I was looking at Hookers for my big block, but was told the jet coating was not so good. I got on to Sanderson headers