daniel77350

My engine detail has consisted of(so far):

Painted:
-Engine Block(chevy blue)
-Valve covers/air cleaner lid(aluminum but it looks cheezy, it will do)
-Master Cylender(cast iron finish)
-Master Booster(black)
-Radiator shroud(black)
-Actuators(that stupid aluminum color)
-Fan Shroud(black)
-Fan/Fan Clutch(black/again the stupid aluminum)
-water pump(painted it with the block)
-exhaust manifold(a high temp(1200 degrees or something) stupid aluminum color)
-entire fire wall

I think thats it.

I also:
-ran electrical tape over some of the wires to clean it up a little
-replaced nose wire loom
-cleaned all the vacuum hoses(used engine degreeser, it worked like a champ if any of you are looking for something like this)

The pics show it still uncomplete, Im cleaning the wire harness now, then all I really need to do is put the carb back on, and drop in my radiator, then all that'll be left is running wires/hoses.

Well back to work;
Daniel
PS. Since CF is doing bad with their websites lately, is there anyone here that can host 3 pictures for me??

Quickjagg

I could, just email me them, haynes@acadia.net