1970 hood question
02-11-2002, 12:45 AM
#1
Burning Brakes
Thread Starter
Member Since: Jun 2000
Location: GA
Posts: 892
Likes: 0
Received 0 Likes
on
0 Posts
1970 hood question
Hi all,
Making last minute checks before I tear my Vette down. Still hung up on the motor parts. I have the stock 1970 hood on the car. I would like to go with a Edelbrock Performer RPM intake w/750 Holley. I know this is super tight under the stock hood, but will it clear a 454 BIG BLOCK hood from 1970? NOT THE L-88 hood, I know that will work but I don't want to go that big. ANYONE KNOW IF THE 1970 BIG BLOCK hood has more clearance to fit this setup? Any suggestions would be great, I have everything else. Pics coming soon!!!!!!!!!!!!!! :crazy:
Making last minute checks before I tear my Vette down. Still hung up on the motor parts. I have the stock 1970 hood on the car. I would like to go with a Edelbrock Performer RPM intake w/750 Holley. I know this is super tight under the stock hood, but will it clear a 454 BIG BLOCK hood from 1970? NOT THE L-88 hood, I know that will work but I don't want to go that big. ANYONE KNOW IF THE 1970 BIG BLOCK hood has more clearance to fit this setup? Any suggestions would be great, I have everything else. Pics coming soon!!!!!!!!!!!!!! :crazy:
02-11-2002, 01:58 AM
#2
Burning Brakes
Thread Starter
Member Since: Jun 2000
Location: GA
Posts: 892
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1970 hood question (Mr.Gearhead)
I read all the threads on this subject... but it doesn't seem like the question has been answered... thanks everyone... PICS COMING SOON... as I find out how to get them on this site.... new digital camera comes in handy!
02-11-2002, 06:32 AM
#3
Le Mans Master
Re: 1970 hood question (Mr.Gearhead)
As you know the LT-1 engine was offered in 1970. Since the LT-1 has an aluminum higher than stock manifold and a holley card and the stock LT-1 hood is the same as a big block hood I would think it would fit fine. :cheers:
02-11-2002, 07:25 AM
#4
Race Director
Member Since: Apr 1999
Location: CORVETTE 77 385 C.I. TEXAS
Posts: 11,520
Likes: 0
Received 12 Likes
on
12 Posts
Re: 1970 hood question (Mr.Gearhead)
You need a drop base filter & at least 3/4" above float bowl vents.
See this http://forums.corvetteforum.com/zerothread?id=226073
Note Barry's70LT1 posts.
:cool:
See this http://forums.corvetteforum.com/zerothread?id=226073
Note Barry's70LT1 posts.
:cool: