What's the maximum that you can overbore a BB 402
#1
Burning Brakes
Thread Starter
What's the maximum that you can overbore a BB 402
I know there was a post on this but I cannot find it. the measurement between the middle cylinders is .320 This engine is a "spare" that I'm thinking of rebuilding. when I have more time.
thx rod
thx rod
#3
Burning Brakes
Thread Starter
Re: What's the maximum that you can overbore a BB 402 (yooperod)
A 402 is a factory bored 396(72 chevelle), sometimes gm called the 396s or 400s , which can be confusing. I was wondering if it could be bored to 4.250 (427) .
rod
rod
#5
Safety Car
Re: What's the maximum that you can overbore a BB 402 (yooperod)
No, there were no 402s that I know of that had wall thickness for a 4.25" bore. Only early 396s go there...
[Modified by Flareside, 2:28 PM 1/29/2002]
[Modified by Flareside, 2:28 PM 1/29/2002]