Paging convertible owners, looking for hard to find parts!
#1
Melting Slicks
Thread Starter
Paging convertible owners, looking for hard to find parts!
I'm in the process of restoring my convertible top frame. I would like to replace some of the bushings and screws that are used to assemble the top frame. Spoke with Zip today and they only sell these parts for the C1 and C2. Anyone know who sells these parts?
Regards,
Jim
[Modified by Jim73, 7:42 PM 1/28/2002]
Regards,
Jim
[Modified by Jim73, 7:42 PM 1/28/2002]
#3
Race Director
Member Since: Apr 1999
Location: Beverly Hills/Pine Ridge Florida
Posts: 10,733
Received 561 Likes
on
349 Posts
Re: Paging convertible owners, looking for hard to find parts! (Dalannex)
Coffman's Corvettes in Ohio, or Sully's Tops in California. Both can sell you entire repro top frames. They also sell all the bows, rivets, etc. Don't have addresses or phone #'s. Chuck
#4
Melting Slicks
Thread Starter
Re: Paging convertible owners, looking for hard to find parts! (Chuck Gongloff)
Chuck,
Thanks for the tip. Don't need an entire frame. In fact, I have already had my frame restored minus the rivets and bushings which have a lot of play in them. Want to get it as close to new as possible before the new top is installed. What an expensive project :eek:
Regards,
Jim
Thanks for the tip. Don't need an entire frame. In fact, I have already had my frame restored minus the rivets and bushings which have a lot of play in them. Want to get it as close to new as possible before the new top is installed. What an expensive project :eek:
Regards,
Jim