I FINALLY TOOK SOME PICTURES!!
#1
Safety Car
Thread Starter
I FINALLY TOOK SOME PICTURES!!
Yes, you heard it right I snapped a bunch of pictures of my big block project and put them on my home page. You can view the pictures at:
http://www.geocities.com/bence33/index.html
The site contains information about my car, modifications, big block project, dyno numbers and even some of my dad's old cars. Yes, I've been working hard....let me know what you think. It's a pretty plain-Jane site. Thanks! :cheers:
[Modified by bence13_33, 10:20 PM 1/21/2002]
http://www.geocities.com/bence33/index.html
The site contains information about my car, modifications, big block project, dyno numbers and even some of my dad's old cars. Yes, I've been working hard....let me know what you think. It's a pretty plain-Jane site. Thanks! :cheers:
[Modified by bence13_33, 10:20 PM 1/21/2002]
#2
Team Owner
Member Since: Feb 2001
Location: All in!
Posts: 49,198
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In IV Veteran
St. Jude Donor '03-'10
Re: I FINALLY TOOK SOME PICTURES!! (bence13_33)
:cool: :cool: !
Keep the updates coming like this. I love following a detailed project. Especially one like this. :yesnod:
Keep the updates coming like this. I love following a detailed project. Especially one like this. :yesnod:
#4
Drifting
Re: I FINALLY TOOK SOME PICTURES!! (bence13_33)
Shane!
Nice job on the site so far!! I need to get someone to setup a webpage for me as well to document my project and what I have done. I have pictures, just no knowledge on how to set it up.
Keep up the good work. Get some pictures of you and your uncle assembling the motor!
Bob :cheers:
Nice job on the site so far!! I need to get someone to setup a webpage for me as well to document my project and what I have done. I have pictures, just no knowledge on how to set it up.
Keep up the good work. Get some pictures of you and your uncle assembling the motor!
Bob :cheers:
#7
Team Owner
Re: I FINALLY TOOK SOME PICTURES!! (ddn)
Sorry, this site is temporarily unavailable!
The web site you are trying to access has exceeded its allocated data transfer
just sign up for a corvette forum homepage! MJ
The web site you are trying to access has exceeded its allocated data transfer
just sign up for a corvette forum homepage! MJ
#9
Le Mans Master
Member Since: Aug 2000
Location: Semper ubi, sub ubi
Posts: 9,662
Likes: 0
Received 6 Likes
on
6 Posts
Cruise-In VI Veteran
Cruise-In VII Veteran
Re: I FINALLY TOOK SOME PICTURES!! (bence13_33)
Shane,
Blow off that Geocities crap and move your pages to the Corvette Forum home pages, it is too easy, and we'll all be able to see your stuff any time!
Blow off that Geocities crap and move your pages to the Corvette Forum home pages, it is too easy, and we'll all be able to see your stuff any time!
#10
Melting Slicks
Member Since: Mar 2000
Location: WANTED: '68 rear valance with b/u light assemblies IM, e-mail, or PM me here. Thanks!
Posts: 3,206
Likes: 0
Received 0 Likes
on
0 Posts
Re: I FINALLY TOOK SOME PICTURES!! (bence13_33)
http://www.geocities.com/bence33/bbcproject.html
That page shows something other then the front end of a '69 Vette...
That page shows something other then the front end of a '69 Vette...
#13
Le Mans Master
Re: I FINALLY TOOK SOME PICTURES!! (73 LS-4)
Nice pics Bence ! Your cleaning things up really nicely. :yesnod: I too went with the solid motor mounts and I don't know if it's the balancing of my engine, but it not bad at all, much better than anticapated :) .
Your dad looks like he must be a pretty cool guy with such nice cars over the years :cheers: .
Your dad looks like he must be a pretty cool guy with such nice cars over the years :cheers: .
#14
Le Mans Master
Re: I FINALLY TOOK SOME PICTURES!! (SmokedTires)
Bence, be sure to invest in GOOD ARP rod bolts for those nice rods!
#15
Race Director
Member Since: Nov 2000
Location: Waterloo ontario Canada
Posts: 11,872
Likes: 0
Received 9 Likes
on
9 Posts
Re: I FINALLY TOOK SOME PICTURES!! (bence13_33)
Nice job Bence but I could only get your fathers cars before the site went down. The message said it would be up in an hour. I am looking forward to seeing the rest of it.
Thanks Bence
Thanks Bence
#18
Burning Brakes
Re: I FINALLY TOOK SOME PICTURES!! (ZD75blue)
i missed it... the early birds got the worm today :cry
Cant wait to see the pics...
Cant wait to see the pics...
#19
Safety Car
Thread Starter
Re: I FINALLY TOOK SOME PICTURES!! (bence13_33)
Sorry for all the problems, I'll change as much over to the Corvette Forum site as I can tonight.
Mike:
Yea my dad was pretty lucky to have all of the nice cars that he did. He has told me that there are a lot of things that have happened in his life that he would like to forget about....but the late 60's and early 70's he said he wouldn't trade for anything. I suppose I'll have to intest in a set of 7/16" ARP rod bolts.
73 LS-4:
I still have the "049" heads laying around somewhere in the basement. I decided to go to a close chambered head to put my compression...and I'm building my engine very close to the engine of one of the Chevelle Forum members.
Mike:
Yea my dad was pretty lucky to have all of the nice cars that he did. He has told me that there are a lot of things that have happened in his life that he would like to forget about....but the late 60's and early 70's he said he wouldn't trade for anything. I suppose I'll have to intest in a set of 7/16" ARP rod bolts.
73 LS-4:
I still have the "049" heads laying around somewhere in the basement. I decided to go to a close chambered head to put my compression...and I'm building my engine very close to the engine of one of the Chevelle Forum members.
#20
Safety Car
Thread Starter
Site Moved To The Corvette Forum
Well I just finished up changing the site over from Geocities to the Corvette Forum Site. You should now be able to browse my site with ease! You can view the site at:
http://temp.corvetteforum.net/c3/bence454
Sorry for all of the confusion with the Geocities site. Let me know if you experience any problems with this one. :cheers:
[Modified by bence13_33, 10:27 AM 1/22/2002]
http://temp.corvetteforum.net/c3/bence454
Sorry for all of the confusion with the Geocities site. Let me know if you experience any problems with this one. :cheers:
[Modified by bence13_33, 10:27 AM 1/22/2002]