C3 Tech/Performance V8 Technical Info, Internal Engine, External Engine, Basic Tech and Maintenance for the C3 Corvette
Sponsored by:
Sponsored by:

I just went and saw a POOR POOR 69 Convertible...

Old 01-21-2002, 01:59 PM
  #1  
Alwyn678
Team Owner
Thread Starter
 
Alwyn678's Avatar
 
Member Since: Jun 2001
Location: Thomson Georgia
Posts: 43,085
Received 141 Likes on 124 Posts

Default I just went and saw a POOR POOR 69 Convertible...

found out it was a northern car and the frame was rusted...almost into two pieces...But the Body looked great...Red with a black top...It is in Maretta for sale...If someone needs a body this might do nicely...Interior was pretty good as well
Old 01-21-2002, 06:13 PM
  #2  
Dalannex
Safety Car
 
Dalannex's Avatar
 
Member Since: Mar 2000
Location: Northeast South Dakota
Posts: 4,065
Received 16 Likes on 12 Posts

Default Re: I just went and saw a POOR POOR 69 Convertible... (Alwyn678)

What were they asking for it? Frames can be fixed. :yesnod:
Old 01-21-2002, 08:11 PM
  #3  
MikeC
Melting Slicks
 
MikeC's Avatar
 
Member Since: Dec 2000
Location: Union Ontario
Posts: 2,635
Likes: 0
Received 0 Likes on 0 Posts

Default Re: I just went and saw a POOR POOR 69 Convertible... (Dalannex)

Oh you funny southerners! :D

Frames can be replaced!, temporarily fixed, yes prermanently----no. Expect to spend around 3200-3600 USD to replace frame with a reproduction one or $1700USD for a used one.

I'm looking for a frame for mine, but the prices are outrageous, I've been quoted $1900 for an 82 that had an engine fire(won't work because of the rear end) and a burnt up 79 for $1700USD.


Have a good one!
Old 01-21-2002, 08:44 PM
  #4  
Paul L
Team Owner
 
Paul L's Avatar
 
Member Since: Aug 1999
Location: Ontario
Posts: 30,995
Received 93 Likes on 91 Posts

Default Re: I just went and saw a POOR POOR 69 Convertible... (Alwyn678)

Just curious. How can the car be sold without a safety check. That would not happen in this neck of the woods.
Old 01-21-2002, 10:34 PM
  #5  
Dalannex
Safety Car
 
Dalannex's Avatar
 
Member Since: Mar 2000
Location: Northeast South Dakota
Posts: 4,065
Received 16 Likes on 12 Posts

Default Re: I just went and saw a POOR POOR 69 Convertible... (MikeC)

I highly doubt that the entire frame is rusted out end to end. I have seen a lot of rusty corvette frames and fixed quite a few, and have yet to see one that is completely rusted out end to end. You can buy parts for them, cut out the old part, and weld in a new one.
Old 01-21-2002, 11:13 PM
  #6  
Steve Straus
Safety Car
 
Steve Straus's Avatar
 
Member Since: Sep 2000
Location: Charles Town WV
Posts: 4,676
Likes: 0
Received 1 Like on 1 Post

Default Re: I just went and saw a POOR POOR 69 Convertible... (MikeC)

Oh you funny southerners! :D

Frames can be replaced!, temporarily fixed, yes prermanently----no. Expect to spend around 3200-3600 USD to replace frame with a reproduction one or $1700USD for a used one.

I'm looking for a frame for mine, but the prices are outrageous, I've been quoted $1900 for an 82 that had an engine fire(won't work because of the rear end) and a burnt up 79 for $1700USD.


Have a good one!
Wouldn't it just be cheaper to find a junker crapped out 69-79 (I understand 68 has a SLIGHTLY different frame) and just use the frame from it?
Old 01-21-2002, 11:14 PM
  #7  
bamavettes
Melting Slicks
 
bamavettes's Avatar
 
Member Since: Sep 1999
Location: Deep in the Heart of Dixie Alabama
Posts: 2,738
Likes: 0
Received 1 Like on 1 Post

Default Re: I just went and saw a POOR POOR 69 Convertible... (Dalannex)

I have a good body--frame man. He said don't ever turn down a good buy on a Corvette because of the frame. He showed me several ways to make them right. 1. cut out the rotted place and weld in a new piece.
2. cut a smaller channell piece and fit it inside the old piece for strength.
He said there are many ways to skin this cat.

If the price is right. It still might be a good deal.

You never said how much he is asking.

Old 01-22-2002, 12:12 AM
  #8  
The_Dude
Team Owner
 
The_Dude's Avatar
 
Member Since: Jul 2001
Location: Here to make friends
Posts: 60,657
Received 473 Likes on 140 Posts
St. Jude Donor '11, '16-'17

Default Re: I just went and saw a POOR POOR 69 Convertible... (MikeC)

There is a '77 frame on ebay right now for $99.
Old 01-22-2002, 03:41 PM
  #9  
Alwyn678
Team Owner
Thread Starter
 
Alwyn678's Avatar
 
Member Since: Jun 2001
Location: Thomson Georgia
Posts: 43,085
Received 141 Likes on 124 Posts

Default Re: I just went and saw a POOR POOR 69 Convertible... (The_Dude)

Wow
There is a '77 frame on ebay right now for $99.

Maybe I should go and offer him something for this car.....Wow
Old 01-22-2002, 05:39 PM
  #10  
69L71
Drifting
 
69L71's Avatar
 
Member Since: Mar 1999
Location: Lusby MD
Posts: 1,381
Received 15 Likes on 7 Posts

Default Re: I just went and saw a POOR POOR 69 Convertible... (Alwyn678)

Its true, frames can be repaired or replaced. Just make sure you're ready to undertake the rest of the operation. If you pull the body to repair/replace the frame it would be silly not to rebuild the suspension, replace the brake lines, do the trailing arms, and have a serious look at the rear. Then, when you have that done you'll be unhappy with the body sitting on a restored chassis. Then after paint you'll hate the interior. It goes on and on....

Trust me. That's how I wound up having $25K into the 69 'vert I bought for $7900.
Old 01-22-2002, 05:45 PM
  #11  
Alwyn678
Team Owner
Thread Starter
 
Alwyn678's Avatar
 
Member Since: Jun 2001
Location: Thomson Georgia
Posts: 43,085
Received 141 Likes on 124 Posts

Default Re: I just went and saw a POOR POOR 69 Convertible... (69L71)

excellent point :eek:
Old 01-22-2002, 08:44 PM
  #12  
Vettesic
Drifting
 
Vettesic's Avatar
 
Member Since: May 2000
Location: Long Island NY
Posts: 1,470
Received 35 Likes on 23 Posts

Default Re: I just went and saw a POOR POOR 69 Convertible... (Alwyn678)

Don't forget about all those ugly stress cracks when the body-off is done. And oh yea, might as well strip down all those years of paint and do all necessary body work!!. :D

Get notified of new replies

To I just went and saw a POOR POOR 69 Convertible...



Thread Tools
Search this Thread
Quick Reply: I just went and saw a POOR POOR 69 Convertible...



All times are GMT -4. The time now is 10:13 AM.