How much should I ask for my 350?
#1
Burning Brakes
Thread Starter
Member Since: Aug 2001
Location: Bay City MI.
Posts: 1,002
Likes: 0
Received 0 Likes
on
0 Posts
How much should I ask for my 350?
Just found out that my original motor for my 71 coupe is actually a 76 4 bolt main block with 71 8.5-1 heads. I have no need to keep it now, since it did not come with the car and I am building a 454 engine. How much should I ask for it? The block was magnufluxed as was the crank, heads and cam. All in very good shape. Thanks for the info.
#3
Burning Brakes
Thread Starter
Member Since: Aug 2001
Location: Bay City MI.
Posts: 1,002
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much should I ask for my 350? (QuickVet)
Block, and heads, also have the crank with rods and pistons, and pan. It could use new main bearings , but that is about it. I sold the rocker arms but do have push rods.
#6
Melting Slicks
Re: How much should I ask for my 350? (LT1-Tom)
After swapping in the 383 I sold the old engine complete (minus oil pan, accessories, distributor and carb) for $75. It was running well but it was tired.
The short block (4 bolt) was not original but the heads and intake were.
If you can get $500 for yours,. . . GO FOR IT!!!
The short block (4 bolt) was not original but the heads and intake were.
If you can get $500 for yours,. . . GO FOR IT!!!
#7
Race Director
Re: How much should I ask for my 350? (Bans25)
I would sell it for that price..