Thank-you ALL for helping me elimitate the Idler Pulley on a 454
#1
Burning Brakes
Thread Starter
Member Since: Nov 2001
Location: Toronto Ontario
Posts: 787
Likes: 0
Received 0 Likes
on
0 Posts
Thank-you ALL for helping me elimitate the Idler Pulley on a 454
I would like to thank "ALL" for your suggestions regarding elimitating the idler pulley on a 454 vette with air. I found using a 33 X ½ inch. Was the perfect length. I did remove the water pump pulley and with –out anny fuss the fit was perfect. This is the way it should have come from GM.
#2
Re: Thank-you ALL for helping me elimitate the Idler Pulley on a 454 (73-454)
I would like to thank "ALL" for your suggestions regarding elimitating the idler pulley on a 454 vette with air. I found using a 33 X ½ inch. Was the perfect length. I did remove the water pump pulley and with –out anny fuss the fit was perfect. This is the way it should have come from GM.
#3
Melting Slicks
Re: Thank-you ALL for helping me elimitate the Idler Pulley on a 454 (73-454)
I read your email earlier today and tried to call...but could not get thru. I am glad to read that you already took care of it. Mine was #33017 or #32517 I'm not sure which is which...one is for alternator & ps pump. :cheers:
#4
Racer
Member Since: Jun 2000
Location: Philadelphia UsA
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
Re: Thank-you ALL for helping me elimitate the Idler Pulley on a 454 (73-454)
I followed your thread, just got into a new car last month, and the adventure you just completed awaits me soon. Glad to have found this.