DREGSZ

Hi All,
I just finished the front suspension and trailing arms, and need a 4 wheel alignment.
Does anyone have the stock specs?
and does anyone have general hotlap/road course specs to work with?

Thanks, Merry and Happy

Frank75

From Vette Brakes and Products, Inc.:

Front Driver Adv. Street Autocross Track
-----------------------------------------------------------------------

Toe 1/32" in 0 3/16 out 0-1/16 out
Camber 0 .25 neg. 1.5-2 neg. 1-2 neg.
Caster 2.75 pos. same same same

Rear
------------------------------------------------------------------

Toe 1/8" in. 1/8 in 1/16 in 1/8 in
Camber 0 .5 neg. .75-1.5 neg. .75-1.5 neg.



[Modified by Frank75, 2:32 PM 12/23/2001]

Frank75

I tried to fix the table spacing, but didn't have any luck. Post if it's not clear.

Allan71

from Dick Guldstrand.....


Front Camber
Street.................1/4 to 1/2 neg
Autocross.........1/2 to 1 neg
Race...........1/2 to 1 neg

Front Caster
Street................1 1/2 to 2 1/2 pos
Autocross........1/2 to 1 pos
Race..............2 to 3 pos

Front Toe
Street...............1/8 to 3/16 in
Autocross........1/8 to 1/8 in
Race.............0 to 3/16 in


Rear Camber
Street...............0 to 1/2 neg
Autocross.......1/2 to 3/4 neg
Race............1/2 to 1 neg

Rear Toe
Street.............1/16 to 1/8 in
Autocross.....0 to 1/4 in
Race...............0 to 1/4 in

Bills17n72

Evan
Hey I dont know about toe in or toe out or all that crap,but my rear wheels got out of adjustment, and I took it in for an alinement, and they told me that my strutrods were bad. So I bought some of those ajustable rear strutrods and put them on ,I must say it wasnt easy, anyway when I got done ,I took the rear trim rings off and cut a 2 by 4 the lenght of the rim ,put a level on the 2 by 4 ,and slowly turned the strut rod till I got the level between the lines. And if you take a look at the rear wheels they look perfect. This is just my 2 cents worth!!!!! yo Bill