in dragtop dyno...
#2
Drifting
Re: in dragtop dyno... (Vetteboy)
The '95 Corvette in there is pretty close. You can weigh your car at a truck weigh station for the weight...Just on the raw measurements, the car has approximately 18-22 sqft of frontal area, and roughly a 49% drive wheel weight ratio (with driver, and a small block). Drag coeff is somewhere around a .30, I'll have to see if some of this aeronautics stuff they taught me can actually give me that number. :smash:
#3
Melting Slicks
Member Since: Dec 2000
Location: Wichita, KS
Posts: 2,041
Likes: 0
Received 0 Likes
on
0 Posts
Re: in dragtop dyno... (rainman69)
This is taken from "THE CORVETTE BLACK BOOK". 1980 page.
"The integrated spoilers improved the drag coefficient from .503 to .443 compared to the 1979 model equiped with optional, non-integrated spoilers."
Kind of like a barn door compared to todays mid size 4 door sedan. At least they LOOK fast!
"The integrated spoilers improved the drag coefficient from .503 to .443 compared to the 1979 model equiped with optional, non-integrated spoilers."
Kind of like a barn door compared to todays mid size 4 door sedan. At least they LOOK fast!