Wrencher

A buddy of mine has a Cobra replica we're finishing up, and it came equipped with a MSD 6AL pre-installed. It has 12V power on the main supply, but nothing on the red or orange lines. Is the red switched and the orange the distributor line? He didn't get any documentation on the MSD system, so if someone has it, maybe it could be scanned or something? As always, all help is appreciated!

Hans

norvalwilhelm

MSD has a web site and all the wiring diagrams are available off this site. Just do a search for MSD.

norvalwilhelm

Took this from another post. http://www.msdignition.com

69ttop502

The heavy red is battery, smaller red is switched 12 volts and the orange to the + side of coil.

69classchass

I installed a 6a module in my car. Im thinking the only difference between a 6al is no revlimiter. Same wiring.

I have the way I wired it here, at the bottom of the page. It may help? http://www.weavermill.com/dist/installdist.htm

Tom