Which cam to use?
12-18-2001, 10:46 PM
#1
Instructor
Thread Starter
Member Since: Nov 2000
Location: Burkburnett, TX
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Which cam to use?
A little off topic but still useful to many. In my suburban with the TBI 350 for 89 it does not pull a heavy load good especially uphill. Will the 260 or 268 cam work well in this motor to pull better? It is soon to be 4WD. I will be running about 9.5:1 comp ratio.
12-18-2001, 11:03 PM
#2
Race Director
Member Since: Nov 2000
Location: NC,USA
Posts: 16,416
Likes: 0
Received 0 Likes
on
0 Posts
Re: Which cam to use? (81Batman)
maybe the extreame 252 or 260... can you say stump puller... it wont be to great on the top but it'll get good gas milage :yesnod: