Harborfreight PS Pulley Removal Tool
#1
Le Mans Master
Thread Starter
Member Since: Jul 2000
Location: Saginaw Michigan
Posts: 6,001
Likes: 0
Received 98 Likes
on
81 Posts
Harborfreight PS Pulley Removal Tool
Harborfreight has a pulley removal tool for about $10.00. It looks like an awfully cheap investment.
http://www.harborfreight.com/cpi/cta...emnumber=43188
#2
Instructor
Member Since: Nov 2001
Location: Burlington NC
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Re: Harborfreight PS Pulley Removal Tool (Jim Shea)
I've got one I had to buy several years ago thanks to a Mercury Sable. Looks about the same, only mine cost $50.00
#4
Le Mans Master
Re: Harborfreight PS Pulley Removal Tool (slide)
Jim- I saw that.
There is a new Harbor Freight outlet here in Raleigh... might take a look at the puller today. Mine cost $50 as well (I was in a jam, paid too much). You have to watch both Harbor Freight & Northern Tools... a lot of their stuff is junk. Just picked up the O-ring & c-clip packages and the quality is extremely poor. I buy a lot of items from both of them, but I'm skeptical and careful each time I go there. There is a Northern Tool outlet here as well.
There is a new Harbor Freight outlet here in Raleigh... might take a look at the puller today. Mine cost $50 as well (I was in a jam, paid too much). You have to watch both Harbor Freight & Northern Tools... a lot of their stuff is junk. Just picked up the O-ring & c-clip packages and the quality is extremely poor. I buy a lot of items from both of them, but I'm skeptical and careful each time I go there. There is a Northern Tool outlet here as well.
#5
Melting Slicks
Re: Harborfreight PS Pulley Removal Tool (Tom454)
I just stopped by the Harborfreight here in Charlotte, and man is that a great store. I was almost crying I was so happy see all those tools for so cheap. I purchased a torque wrench for $11.00 on sale. I think I will be a regular in that store. Do they have a frequent buyer program :)
Regards,
Jim
Regards,
Jim
#6
Advanced
Member Since: Oct 2001
Location: Las Vegas NV
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Re: Harborfreight PS Pulley Removal Tool (Jim73)
I agree with tom454. Harbor freight is a fun store, but be aware of cheap imitations. They have good deals on name brand power tools, but sometimes that deal is for a reconditioned tool. I usually stick to name brand hand tools, and they have plenty of deals on those. Some things are good if you only plan to use it once or twice.Just use a little common sense, and don't let all those cool tools cloud your judgement.