Testing the waters.. 99 FRC modified vette FS
#1
Burning Brakes
Thread Starter
Member Since: Feb 2003
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
Testing the waters.. 99 FRC modified vette FS
Wasn't really going to post this until the spring, but figured I'd go ahead and check the interest now. The pics posted below are when some of the panels were just wetsanded. They've since been compounded and polished. I'll take some new pics soon and post them. Email me if interested as I don't check the forums much anymore.
thomas@mroz.com
$25k obo
The car has the following:
LS1 engine - all work done myself at 50k miles, approx 80k on it now:
Patriot Performance Stage II CNC LQ9 6.0L heads - 59cc, 11.5:1CR, Crane double springs, Ti retainers
Manley pushrods
Rollmaster timing chain
Harland Sharp 1.7 rockers
TSP 231/237 .598/.595 @ 112lsa cam
Comp 850 lifters
TSP ported LS6 oil pump
LS6 intake / accell 42lb injectors
Kook's 1 7/8" headers
Hooker exhaust
ASP pulley
HPtuners tuned
I estimate the car making between 440-460 to the wheels. I've never had it dyno'd, but have installed this same combination of parts on two other local vettes and they've put down ~450rwhp on the dyno.
M6 transmission
Hurst short throw shifter
Tiger Shark front and rear fascias
RKsport hood
ACI side splitters
Iforged Trial 3 piece wheels - 19"/20" combo with 4" lips on rear
Corbeau CR1 seats
Corbeau 5 point harnesses
Arizona speed and marine harness bar
HUD retrofit
thomas@mroz.com
$25k obo
The car has the following:
LS1 engine - all work done myself at 50k miles, approx 80k on it now:
Patriot Performance Stage II CNC LQ9 6.0L heads - 59cc, 11.5:1CR, Crane double springs, Ti retainers
Manley pushrods
Rollmaster timing chain
Harland Sharp 1.7 rockers
TSP 231/237 .598/.595 @ 112lsa cam
Comp 850 lifters
TSP ported LS6 oil pump
LS6 intake / accell 42lb injectors
Kook's 1 7/8" headers
Hooker exhaust
ASP pulley
HPtuners tuned
I estimate the car making between 440-460 to the wheels. I've never had it dyno'd, but have installed this same combination of parts on two other local vettes and they've put down ~450rwhp on the dyno.
M6 transmission
Hurst short throw shifter
Tiger Shark front and rear fascias
RKsport hood
ACI side splitters
Iforged Trial 3 piece wheels - 19"/20" combo with 4" lips on rear
Corbeau CR1 seats
Corbeau 5 point harnesses
Arizona speed and marine harness bar
HUD retrofit
#4
Intermediate
Member Since: Dec 2007
Location: Chi Town IL
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Wasn't really going to post this until the spring, but figured I'd go ahead and check the interest now. The pics posted below are when some of the panels were just wetsanded. They've since been compounded and polished. I'll take some new pics soon and post them. Email me if interested as I don't check the forums much anymore.
thomas@mroz.com
$25k obo
The car has the following:
LS1 engine - all work done myself at 50k miles, approx 80k on it now:
Patriot Performance Stage II CNC LQ9 6.0L heads - 59cc, 11.5:1CR, Crane double springs, Ti retainers
Manley pushrods
Rollmaster timing chain
Harland Sharp 1.7 rockers
TSP 231/237 .598/.595 @ 112lsa cam
Comp 850 lifters
TSP ported LS6 oil pump
LS6 intake / accell 42lb injectors
Kook's 1 7/8" headers
Hooker exhaust
ASP pulley
HPtuners tuned
I estimate the car making between 440-460 to the wheels. I've never had it dyno'd, but have installed this same combination of parts on two other local vettes and they've put down ~450rwhp on the dyno.
M6 transmission
Hurst short throw shifter
Tiger Shark front and rear fascias
RKsport hood
ACI side splitters
Iforged Trial 3 piece wheels - 19"/20" combo with 4" lips on rear
Corbeau CR1 seats
Corbeau 5 point harnesses
Arizona speed and marine harness bar
HUD retrofit
thomas@mroz.com
$25k obo
The car has the following:
LS1 engine - all work done myself at 50k miles, approx 80k on it now:
Patriot Performance Stage II CNC LQ9 6.0L heads - 59cc, 11.5:1CR, Crane double springs, Ti retainers
Manley pushrods
Rollmaster timing chain
Harland Sharp 1.7 rockers
TSP 231/237 .598/.595 @ 112lsa cam
Comp 850 lifters
TSP ported LS6 oil pump
LS6 intake / accell 42lb injectors
Kook's 1 7/8" headers
Hooker exhaust
ASP pulley
HPtuners tuned
I estimate the car making between 440-460 to the wheels. I've never had it dyno'd, but have installed this same combination of parts on two other local vettes and they've put down ~450rwhp on the dyno.
M6 transmission
Hurst short throw shifter
Tiger Shark front and rear fascias
RKsport hood
ACI side splitters
Iforged Trial 3 piece wheels - 19"/20" combo with 4" lips on rear
Corbeau CR1 seats
Corbeau 5 point harnesses
Arizona speed and marine harness bar
HUD retrofit
Hey bud Happy New Year,Nice car, got a question do u know if they sell Tiger Shark tail Fascias for Vipers?SRT10? Thanx in Advance.
#8
Burning Brakes
Thread Starter
Member Since: Feb 2003
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys. Wow, I never expected to get so many emails and PM's after only one day..
I did forgot to mention, I'd rather not have to deal with shipping right now. I'd prefer a local sale in person.
bb, sorry, I'm really not sure about the Viper stuff.
Thanks,
Tom
I did forgot to mention, I'd rather not have to deal with shipping right now. I'd prefer a local sale in person.
bb, sorry, I'm really not sure about the Viper stuff.
Thanks,
Tom
#10
Cruising
Member Since: Nov 2007
Location: Clarksville TN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
#12
Burning Brakes
#16
Drifting