Another '80-'81 4 speed question.
#1
Racer
Thread Starter
Member Since: Dec 2000
Location: Wisconsin Rapids, WI USA
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Another '80-'81 4 speed question.
What rear gear ratio did GM use for these two years on the manual tranny cars? Thanks
Also, one stupid question: what does it mean when someone types ttt as a reply??
Also, one stupid question: what does it mean when someone types ttt as a reply??
#2
Burning Brakes
Member Since: Aug 2000
Location: LT1 and LS5 Coupes... New Orleans, LA
Posts: 925
Likes: 0
Received 0 Likes
on
0 Posts
Re: Another '80-'81 4 speed question. (Magnum '82)
1980................3.07
1981................2.72
No optional ratios in 1980; in 1981, RPO G92 was available only together with RPOs MX3 and YF5, so all manual tranny cars in both years will have their standard axle ratio.
ttt...........means "To the Top", or just another way of getting your post back to the top of the board where hopefully someone will see it again and respond.
1981................2.72
No optional ratios in 1980; in 1981, RPO G92 was available only together with RPOs MX3 and YF5, so all manual tranny cars in both years will have their standard axle ratio.
ttt...........means "To the Top", or just another way of getting your post back to the top of the board where hopefully someone will see it again and respond.