FS: Canton Accusump/Wheels, tires/Race seats
#1
Drifting
Thread Starter
FS: Canton Accusump/Wheels, tires/Race seats
I have a brand new Canton 3 Quart Accusump with all the fittings and hardware required for installation. Sold.
Also have some Kumho V710 slicks on Stock size Camaro Z-28 wheels. Tire size is 265-45-16. Only 4 laps on these tires and the wheels are in fair shape. $495 plus shipping or pick up in Albany, NY.
I have a pair of 3A races seats in good condition. Useable with 5 or 6 point harnesses. Comes with 3 point harnesses.$250 plus shipping or pickup in Albany.
Also have some Kumho V710 slicks on Stock size Camaro Z-28 wheels. Tire size is 265-45-16. Only 4 laps on these tires and the wheels are in fair shape. $495 plus shipping or pick up in Albany, NY.
I have a pair of 3A races seats in good condition. Useable with 5 or 6 point harnesses. Comes with 3 point harnesses.$250 plus shipping or pickup in Albany.
Last edited by H82GOSLW; 10-20-2007 at 08:32 PM.
#4
Melting Slicks
would the seats go in a street car, or are they too hard to get into and out of?
Padding really thin, or?
I've been looking for a set of Corbeau's, but haven't come across a set locally yet. And Albany is local enough...
Padding really thin, or?
I've been looking for a set of Corbeau's, but haven't come across a set locally yet. And Albany is local enough...
#5
Drifting
Thread Starter
Seats came out of my car which was a street and track car. Not too bad. Padding is actually pretty good. These were comfortable seats and really hold you in place while taking those turns. I travel to Springfield Mass. once per month for work. I'd be willing to bring the seats out and meet up with you. You can see them in person and if you like them you can take them on the spot. If not, I'll just bring them back home.
#6
Safety Car
How hard is it to switch seats? Are these a correct fit for Z06? I would like to have some that would switch out easily for track days, but put my reg ones in for DD. Thanks for info.
#7
Drifting
Thread Starter
I had these seats in an F body. The rails I have will work for that type of car. My guess is you'd have to purchase new rails for your Z. It's easy enough to switch out as the seats are only held down with 4 bolts.
#8
Tech Contributor
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,112
Received 8,945 Likes
on
5,343 Posts
Missed you at the August Phoenix event. Are you changing cars?
Bill
Bill
#9
Drifting
Thread Starter
Hey Bill, selling the car and all the accessories I have for now. Seriously considered purchasing another car I saw on this forum as I greatly miss the C5, but have decided to get out of the car scene for a while. Who knows what the future may bring. Thanks for the great learning experience at Watkins back in June.