attn H.E.I boffins - need help
11-13-2001, 08:48 AM
#1
Cruising
Thread Starter
Member Since: Nov 2001
Location: Perth, WA Australia
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
attn H.E.I boffins - need help
Hello,
I am trying to figure out why there is no spark in my ignition and I think i have isolated it to the h.e.i component.
When i have my ignition turned to the on position, on one side of the H.E.I component the 2 wires going in to it are both reading 12 volts but on the other side the 2 wires are only reading 1.5 volts.
Is this meant to be the case or is the component stuffed?
Regards,
Frank
I am trying to figure out why there is no spark in my ignition and I think i have isolated it to the h.e.i component.
When i have my ignition turned to the on position, on one side of the H.E.I component the 2 wires going in to it are both reading 12 volts but on the other side the 2 wires are only reading 1.5 volts.
Is this meant to be the case or is the component stuffed?
Regards,
Frank
