Tall Aluminum valve covers NEW
04-13-2007, 08:25 AM
#3
Race Director
Thread Starter
04-13-2007, 11:42 AM
#4
Le Mans Master
Member Since: Nov 2003
Location: Maryland
Posts: 5,661
Received 614 Likes
on
369 Posts
St. Jude Donor '05, '09, '15
Finally got hold of my buddy, 77Stroker. He will probably pm you.
Thanks for the
on the car.
I see yours has some mods too. I don't see many coupes done that way. I don't undstand why. Coupes really have better lines than convertables, moded cars included.
Thanks for the
on the car.I see yours has some mods too. I don't see many coupes done that way. I don't undstand why. Coupes really have better lines than convertables, moded cars included.
04-14-2007, 03:37 PM
#7
Race Director
Thread Starter
SBC. They are the taller covers to clear roller rockers and stud girdles. They are heavy 1 piece polished aluminum. The center is not removable. These are the Edelbrock Elite covers with no logo. Hard to find the no logo covers in the tall. I bought them for my 383 build but went with Baldwin Motion covers with 1 1/2 " spacers to accomidate the rockers and girdles. Cost me $350 to upgrade.
I got over $100 in the Edelbrocks and just trying to get most of my $ back out of them.
I got over $100 in the Edelbrocks and just trying to get most of my $ back out of them.
