1971_CorVette

FOR SALE
GM Crate motor, it is a fast burn 385 with about 3500 Miles on it. It was put into a corvette which ran a 12.65 Pass, and was Dynoed with a 5 spd at 308 HP and 296 ft lbs at the wheels all tuned in. The motor has the hot cam option that can be added to bring it up to 430 hp at the crank. Included is a victor jr intake manifold, Stock dual plane intake. It has Gm Aluminum Fast burn heads, and a hydraulic roller cam. This motor is a great street motor because the reliablity is there which is why i bought it. It is in the car now, and will be removed at time of the sale. This motor will start no matter what the conditions. the motor sells now for $5,200. Please Call Marc @ 215.266.1714 for more information and pics of the actual motor. I am located in philadelphia and I am flexable with shipping, and will meet buyer with in reason for delivery. For factory specs go to: http://www.high-performance-engines.com/ce04.html

C3 4ME

Sounds like a heckuva deal, I wish I had the money to spend! Good luck on the sale.

Brat

Why are you selling it ,it a great deal ,what goes with the engine ,carb ect

1971_CorVette

I am selling it because i have a lead on a fuel injected 400 small block. everything that is included is distributor, water pump, ballencer, two intakes, a victor jr and the stock dual plane, I have a holley HP on it now, but I am going to hold on to that. any other questions, please feel free to call

1971_CorVette

just getting it to the top of the pile again.