Handy tool I made.
#1
Melting Slicks
Thread Starter
Handy tool I made.
I bought my wife new tires for her 93 for Xmas, romantic devil that I am, and I finally came up with something to make the wheel installation go easier. I have those metal shields that fit into the backside of the wheel to help keep the brake dust off of the face of the wheels and it completely blocks any chance of seeing where the wheel studs are in relationship to the holes in the rim. Add that to the fact that I am forever taking the wheels off to clean the car for shows and I only have a floor jack & jack stands to work with, NOT a fancy lift like SOME people and it gets to be quite a job that gets repeated at LEAST one a month in the show season. I just happen to have an old metal lathe in my garage and within 15 minutes I came up with this handy little stud extension. It helped cut SOME of the cursing & swearing out of the job !!
#7
Race Director
#15
Melting Slicks
Thread Starter
WOW!! Everyone's responce is overwhelming. Probubly the first question I should ask is: What is a tool like this WORTH to you guys?
I am NOT looking to get rich off of this thing.
I am NOT looking to get rich off of this thing.
#16
Race Director
I'm in for two as well...
Time & materials with a 40% mark-up plus something for your creativity.... Is one way to think about pricing...
If someone were to patent the idea, the cost of an international patent covering NAm, EU, Brazil, Austrailia, Japan and China is running about $120K these days...
Time & materials with a 40% mark-up plus something for your creativity.... Is one way to think about pricing...
If someone were to patent the idea, the cost of an international patent covering NAm, EU, Brazil, Austrailia, Japan and China is running about $120K these days...
#20
Elite Torch Red Member
don't those dust shields block the flow of air necessary to cool the brakes?