FS: Superram and Edelbrock Base
#1
Melting Slicks
Thread Starter
FS: Superram and Edelbrock Base
I have for sale an Accel Superram Plenum & runner kit (billet lid) and also a TPI Edelbrock base for sale. A couple of flaws to mention:
-Both runners have been clearanced for tall valve covers (see pic)
-Plenum has two inner plenum holes drilled out and had the runners tapped to ease install. (Two bolts install from the inside of plenum)
Parts are a little dirty and need some TLC but everything is there and in one piece. Also comes w/ a brand new set of gaskets for the superram ($32 at Summit). Asking $675 + shipping. Only selling the superram and base as a package. Any questions feel free to IM . Thanks.
Mike
-Both runners have been clearanced for tall valve covers (see pic)
-Plenum has two inner plenum holes drilled out and had the runners tapped to ease install. (Two bolts install from the inside of plenum)
Parts are a little dirty and need some TLC but everything is there and in one piece. Also comes w/ a brand new set of gaskets for the superram ($32 at Summit). Asking $675 + shipping. Only selling the superram and base as a package. Any questions feel free to IM . Thanks.
Mike
Last edited by NUckINg FuTS; 10-29-2006 at 08:43 PM.
#4
Melting Slicks
Thread Starter
Originally Posted by 88BlackZ-51
very good price. curious do u have pics of the port hole on the SR?
anything ported?
anything ported?
Superram is untouched. The ports on the Edelbrock base are gasket matched. Looks like a professional or a very good porter did the work.
#7
Drifting
It's just not in the cards
It doesn't look as if it's my turn to score one of the best deals I've seen in quite some time. Sorry if I've held up the sale,
it looks as if "89Corvette6spdFX3" is next in line. Best of luck
with the sale.
it looks as if "89Corvette6spdFX3" is next in line. Best of luck
with the sale.
#12
I could be intersted...despite this post. If 89Crovette6spdFX3 doesn't want it.
http://forums.corvetteforum.com/show....php?t=1537419
But I'd have to know pretty darn quick, because I'm trying to pick the cam.
How much expense would I incurr in setting this up outside of the purchase price?
http://forums.corvetteforum.com/show....php?t=1537419
But I'd have to know pretty darn quick, because I'm trying to pick the cam.
How much expense would I incurr in setting this up outside of the purchase price?
#19
Mike sold it to me...
I've not yet seen it - he shipped it at my request directly to the vendor building my 383. I should recieve the motor folllowing my return from PA(visiting family for thanksgiving) in early December!
Mike's been a great guy to work with!
I've not yet seen it - he shipped it at my request directly to the vendor building my 383. I should recieve the motor folllowing my return from PA(visiting family for thanksgiving) in early December!
Mike's been a great guy to work with!
#20
Melting Slicks
Thread Starter
Originally Posted by Archaea
Mike sold it to me...
I've not yet seen it - he shipped it at my request directly to the vendor building my 383. I should recieve the motor folllowing my return from PA(visiting family for thanksgiving) in early December!
Mike's been a great guy to work with!
I've not yet seen it - he shipped it at my request directly to the vendor building my 383. I should recieve the motor folllowing my return from PA(visiting family for thanksgiving) in early December!
Mike's been a great guy to work with!
Thanks Jonathan. Hope you had a great Thanksgiving. If you have any questions or problems w/ the Superram install, feel free to give me a call.