420-450rwhp for $3595: TSP cnc'd 243 heads, CTCorvette custom cam, installed/tuned
#1
Le Mans Master
Thread Starter
Member Since: Sep 2003
Location: Farmington CT
Posts: 6,125
Received 160 Likes
on
125 Posts
Cruise-In VII Veteran
420-450rwhp for $3595: TSP cnc'd 243 heads, CTCorvette custom cam, installed/tuned
EFI Live tuning by Don Kinder 'slowhawk'
Texas Speed LS6 CNC'd heads
TSP dual valvesprings, Titanium retainers, seats, valve seals
TSP Trend pushrods
Custom Comp Cam
LS2 timing chain
LS6 oil pump
GM gaskets(H20 pump, front cover, crank seal, oil pump oring)
GM MLS head gaskets
PowerBond Underdrive crank pulley
ARP head studs
Mobil 1/new oil filter
Dexcool coolant/distilled water
NGK TR55 plugs
Options: (prices listed are installed)
AFR heads: $1000
LS6 intake: $395
FAST 90/LS2 T/body: call
LS6/7 lifters: $130
American Racing headers: $1650 (2 week wait on AR headers, call for 1.75/1.875//3/2.5)
polished pwr/stg alt. bracket: $150
polished tensioner(new GM): $150
Borla/Corsa/B&B catback: call
Callaway Honker: call, (I should have one at the shop today)
This combo produced 447whp on 'Turbo1k' 2000 FRC w/ a FAST90/LS2 T/body
'My 00 vette' picked up 100whp using the above combo w/ an LS6 intake on his 2000 coupe
'Billdog350' is next up, similar setup with a 228/232 cam, not a bad way to freshen up a 115k mile motor
Stop by the shop, 1145 RT. 5, South Windsor CT, new Bendpak lift is installed
Texas Speed LS6 CNC'd heads
TSP dual valvesprings, Titanium retainers, seats, valve seals
TSP Trend pushrods
Custom Comp Cam
LS2 timing chain
LS6 oil pump
GM gaskets(H20 pump, front cover, crank seal, oil pump oring)
GM MLS head gaskets
PowerBond Underdrive crank pulley
ARP head studs
Mobil 1/new oil filter
Dexcool coolant/distilled water
NGK TR55 plugs
Options: (prices listed are installed)
AFR heads: $1000
LS6 intake: $395
FAST 90/LS2 T/body: call
LS6/7 lifters: $130
American Racing headers: $1650 (2 week wait on AR headers, call for 1.75/1.875//3/2.5)
polished pwr/stg alt. bracket: $150
polished tensioner(new GM): $150
Borla/Corsa/B&B catback: call
Callaway Honker: call, (I should have one at the shop today)
This combo produced 447whp on 'Turbo1k' 2000 FRC w/ a FAST90/LS2 T/body
'My 00 vette' picked up 100whp using the above combo w/ an LS6 intake on his 2000 coupe
'Billdog350' is next up, similar setup with a 228/232 cam, not a bad way to freshen up a 115k mile motor
Stop by the shop, 1145 RT. 5, South Windsor CT, new Bendpak lift is installed
#5
Safety Car
Originally Posted by fright88
**** for that I'd be tempted to drive there. No vacation till December tho
#7
Racer
Member Since: Dec 2005
Location: Northern Virginia
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
What a dealio Connicut here I come.
Is there sales tax on out of state cars?
I'm looking fo torque down low, what could i expect w/ this combo?
Could PRC supply some small runner ported ls6 heads?
Is there sales tax on out of state cars?
I'm looking fo torque down low, what could i expect w/ this combo?
Could PRC supply some small runner ported ls6 heads?
Last edited by dmiz0420; 10-27-2006 at 10:53 AM.
#9
Le Mans Master
Thread Starter
Member Since: Sep 2003
Location: Farmington CT
Posts: 6,125
Received 160 Likes
on
125 Posts
Cruise-In VII Veteran
Originally Posted by dmiz0420
What a dealio Connicut here I come.
Is there sales tax on out of state cars?
I'm looking fo torque down low, what could i expect w/ this combo?
Could PRC supply some small runner ported ls6 heads?
Is there sales tax on out of state cars?
I'm looking fo torque down low, what could i expect w/ this combo?
Could PRC supply some small runner ported ls6 heads?
#14
Melting Slicks
Member Since: Aug 2000
Location: Green Cove Springs FL
Posts: 2,900
Likes: 0
Received 2 Likes
on
2 Posts
Wow that is a great deal! I paid as much for my heads/cam a year ago with used parts, and I had to do the install myself. You're offering a turnkey package using new and better parts; including installation. People need to jump all over this
#15
Le Mans Master
Thread Starter
Member Since: Sep 2003
Location: Farmington CT
Posts: 6,125
Received 160 Likes
on
125 Posts
Cruise-In VII Veteran
Originally Posted by FroDaddy
Wow that is a great deal! I paid as much for my heads/cam a year ago with used parts, and I had to do the install myself. You're offering a turnkey package using new and better parts; including installation. People need to jump all over this
waiting on a set of heads right now
#18
Melting Slicks
What a great marketing tool Steve.
It's really good to see someone start here, and head off into a successfull business. I don't get over that way often, but sometime before the car is put away for the winter, I'll stop by.
Best of luck
Mike
(the guy with the flywheel)
It's really good to see someone start here, and head off into a successfull business. I don't get over that way often, but sometime before the car is put away for the winter, I'll stop by.
Best of luck
Mike
(the guy with the flywheel)
#19
Le Mans Master
Thread Starter
Member Since: Sep 2003
Location: Farmington CT
Posts: 6,125
Received 160 Likes
on
125 Posts
Cruise-In VII Veteran
Originally Posted by zulatr
What a great marketing tool Steve.
It's really good to see someone start here, and head off into a successfull business. I don't get over that way often, but sometime before the car is put away for the winter, I'll stop by.
Best of luck
Mike
(the guy with the flywheel)
It's really good to see someone start here, and head off into a successfull business. I don't get over that way often, but sometime before the car is put away for the winter, I'll stop by.
Best of luck
Mike
(the guy with the flywheel)