Service ABS Service Traction
#1
Burning Brakes
Thread Starter
Member Since: Sep 2004
Location: Portland Oregon
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Service ABS Service Traction
Last night i was taking off from work. Went aound a 30MPH corner at about 50-60MPH. Then ther service ABS and Track light comes on. I can shut the car off, reset the code, Start the car and it will stay off till i start to roll. Any ideas? Could my breaks be low? would that cause this? Im tires of looking at the damn ABS light.....
#2
Safety Car
Originally Posted by killaz
Last night i was taking off from work. Went aound a 30MPH corner at about 50-60MPH. Then ther service ABS and Track light comes on. I can shut the car off, reset the code, Start the car and it will stay off till i start to roll. Any ideas? Could my breaks be low? would that cause this? Im tires of looking at the damn ABS light.....
cc
#4
Originally Posted by killaz
Last night i was taking off from work. Went aound a 30MPH corner at about 50-60MPH. Then ther service ABS and Track light comes on. I can shut the car off, reset the code, Start the car and it will stay off till i start to roll. Any ideas? Could my breaks be low? would that cause this? Im tires of looking at the damn ABS light.....
What was the code? C1214?
C5_Pewter_vette
#7
Hey guys, mine did this too, just last night. I hit a bump on the Interstate at about 75mph. It went away when i turned the car off but i havent driven it since. Is there anything else that would cause it other than the ECBM??????
Thanks for the help
Thanks for the help
#10
Burning Brakes
Member Since: Feb 2005
Location: Richardson Texas
Posts: 1,082
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by miac6
looking for best price for tire sizes 305/30/19 can anyone let me know which merchant. thanks
#11
Originally Posted by Bret01Z06
Wrong forum. I hate C1214. I had to replace the EBCM in my car with 52K on the clock.
I had continuous C1214 that would not clear. I took the EBCM out and burnished (scraped) the contacts with a file and then put it back in the car. So far, no problems. I'm going to drive it 60-70 miles round trip tomorrow. I'll keep my fingers crossed.
#12
Burning Brakes
Member Since: Feb 2005
Location: Richardson Texas
Posts: 1,082
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by c5_pewter_vette
I had continuous C1214 that would not clear. I took the EBCM out and burnished (scraped) the contacts with a file and then put it back in the car. So far, no problems. I'm going to drive it 60-70 miles round trip tomorrow. I'll keep my fingers crossed.
#13
Le Mans Master
Originally Posted by Bret01Z06
Wrong forum. I hate C1214. I had to replace the EBCM in my car with 52K on the clock.
I tried cleaning every connection I could get to and nothing
#14
>> So far, no problems. I'm going to drive it 60-70 miles
>> round trip tomorrow. I'll keep my fingers crossed.
Well, it failed. I'm trying to buy the used EBCM I found at Gene's Kar Shop. I hope he still has it.
>> round trip tomorrow. I'll keep my fingers crossed.
Well, it failed. I'm trying to buy the used EBCM I found at Gene's Kar Shop. I hope he still has it.