[Z06] HPE Stage 3 cam and nitrous results
01-15-2006, 02:48 AM
#1
Former Vendor
Thread Starter
Member Since: Nov 2004
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
01-15-2006, 03:03 AM
#3
Get Some!
Also, go ahead and type out the specs and post the print outs for those than can't download a file that big, and I'll add this to the dyno post in the FAQ.
01-15-2006, 10:36 AM
#9
Heel & Toe
Member Since: Oct 2005
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
That is truly incredible. But, seriously, how long can that motor hold together? My guess with 700 rwhp you have over 850 crankshaft HP, probably well beyond the design limits of the pistons and rods.
Pretty cool though.
Pretty cool though.
01-15-2006, 10:52 AM
#13
stock rods are perfect for about any power level in a C6 Z06...
stock pistons will live fine at 150 shot as long as detonation is under control.
with tuning, the dyno graph will look much nicer, kind of spikey now....
get some tuning and that thing will get 735 rwhp and 700 torque I bet with safe timing and AF ratio....
cam, headers, and nitrous....700+rwhp....thats just silly!
stock pistons will live fine at 150 shot as long as detonation is under control.
with tuning, the dyno graph will look much nicer, kind of spikey now....
get some tuning and that thing will get 735 rwhp and 700 torque I bet with safe timing and AF ratio....
cam, headers, and nitrous....700+rwhp....thats just silly!
01-15-2006, 01:08 PM
#19
Drifting
Member Since: Oct 2005
Location: Honolulu
Posts: 1,285
Likes: 0
Received 0 Likes
on
0 Posts
That's insane but there's got to be some serious reliability issues here. What does the Stage 3 put out with headers and no NOS? And was all this with the stock tune on the computer?