Baer Eradispeed Rotors Install, MN6/F55/pix
10-03-2005, 11:50 PM
#1
Pro
Thread Starter
Member Since: Feb 1999
Location: Madison WI
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Baer Eradispeed Rotors Install, MN6/F55/pix
I did it.....
Rear before
Rear after
Front before
Front after
Rear before (please excuse the dirt/rust... it will get cleaned up)
Caliper extender bracket
Caliper extender bracket installed, note the brake cooling duct, I didn't know the stock C6 had rear cooling ducts... I don't remember them on my C5... but then at my age the memory... what was I saying again?
Rotor installed
Best of all, my personal mechanic. In Wisconsin law enforcement is very service oriented
A final note, both of my front brake cooling ducts were misalinged, the right one missed the air scoop opening completely, the left was about half way off.
Rear before
Rear after
Front before
Front after
Rear before (please excuse the dirt/rust... it will get cleaned up)
Caliper extender bracket
Caliper extender bracket installed, note the brake cooling duct, I didn't know the stock C6 had rear cooling ducts... I don't remember them on my C5... but then at my age the memory... what was I saying again?
Rotor installed
Best of all, my personal mechanic. In Wisconsin law enforcement is very service oriented
A final note, both of my front brake cooling ducts were misalinged, the right one missed the air scoop opening completely, the left was about half way off.
10-04-2005, 12:38 PM
#7
Burning Brakes
I had the Baer rotors on my Cobra. Fantastic product. Make sure you opt for the zinc coating. This prevents them from ever rusting. I may eventually switch out my Z51 rotors for a set of these. They are a quality product! 
10-04-2005, 03:31 PM
#8
Le Mans Master
Great information.
Any links on where you got them from and/or price?
Any links on where you got them from and/or price?
10-04-2005, 08:40 PM
#11
Burning Brakes
Originally Posted by cam30era
How about another question?
How do the new brakes feel/work compared to stock?
How do the new brakes feel/work compared to stock?
10-04-2005, 09:18 PM
#12
Pro
Thread Starter
Member Since: Feb 1999
Location: Madison WI
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dark_phantom
Great information.
Any links on where you got them from and/or price?
Any links on where you got them from and/or price?
PFYC Baer page
I should add that their online help was great... Last Thursday I typed a few questions, got immediate "chat type" responses. One of my questions was about compatibility with the F55 suspension. It required the guy helping me to contact Baer, he did that and Emailed an answer to me within 15 minutes. I ordered 'em and had them on the car by Monday evening (with the help of the Wisconsin State Patrol).
