*For Sale: MISC C-4 Parts, hubs, starter,cam, lifters .etc
#1
Drifting
Thread Starter
Member Since: Oct 2003
Location: CALGARY ab
Posts: 1,594
Likes: 0
Received 0 Likes
on
0 Posts
*For Sale: MISC C-4 Parts, hubs, starter,cam, lifters .etc
1(b) Egr & EGR Block-OFF KIT.. a must item if you are removing Emission. $ 25.00 US shipping included
http://members.shaw.ca/vettek/REDVETTE%20048.jpg or/and http://members.shaw.ca/vettek/REDVETTE%20047.jpg
2) hydraulic roller lifters comp cam part # 850-16 fitment - after 87 sbc with roller cam , used but in excellant condtion $160.00 US plus shipping Comp hydraulic Lifter for roller cams ].. OFFERS
3(a) Stock roller cam . used in excellant shape this part was used with above lifters .. $75.00 US, plus shipping (more info,part#& ) OFFERS
stock roller cam PIC
4) Stock modified valve covers. Machined to fit rollers rockers. sandblasted, Painted BASE/Clear COAT "corvette red" . both cover including bolts, inserts and oil cap: $100.00 US plus shipping
Note: tin covers on inside may have to be modified to fit larger rockers.
Stock Covers.. Refurbished, Machined for roller rockers ..OFFERS
5) High torgue starter , good used with new solenoid contacts(partly rebuilt), . fits L98's 88-91 or great replacement for earlier models..$ 100.00 US... Plus shipping.. offers
89 rebuilt starter
5) (2) rear hubs used but in good condition, approx, 45,000 miles(removed from my 89 becuz of total rear end upgrade to new components). these were put on lathe (tested)to determine run out and are still with in stock tolerance. $65.00 US each.. plus shipping
offers My RED VET HUBS
6).... NEW Air pump eliminator modified, single plate design..one only, new construction, C4, 86-90 L98, with Aluminum T-6 as machined pulley, does require new shorter (part #K060882)belt..$195.00US plus shipping
PICTURE here:AIR PUMP ELIMINATOR >>AP#004
PIC#2
PIC#3
please contact me for more info
reference link
http://members.shaw.ca/vettek/REDVETTE%20048.jpg or/and http://members.shaw.ca/vettek/REDVETTE%20047.jpg
2) hydraulic roller lifters comp cam part # 850-16 fitment - after 87 sbc with roller cam , used but in excellant condtion $160.00 US plus shipping Comp hydraulic Lifter for roller cams ].. OFFERS
3(a) Stock roller cam . used in excellant shape this part was used with above lifters .. $75.00 US, plus shipping (more info,part#& ) OFFERS
stock roller cam PIC
4) Stock modified valve covers. Machined to fit rollers rockers. sandblasted, Painted BASE/Clear COAT "corvette red" . both cover including bolts, inserts and oil cap: $100.00 US plus shipping
Note: tin covers on inside may have to be modified to fit larger rockers.
Stock Covers.. Refurbished, Machined for roller rockers ..OFFERS
5) High torgue starter , good used with new solenoid contacts(partly rebuilt), . fits L98's 88-91 or great replacement for earlier models..$ 100.00 US... Plus shipping.. offers
89 rebuilt starter
5) (2) rear hubs used but in good condition, approx, 45,000 miles(removed from my 89 becuz of total rear end upgrade to new components). these were put on lathe (tested)to determine run out and are still with in stock tolerance. $65.00 US each.. plus shipping
offers My RED VET HUBS
6).... NEW Air pump eliminator modified, single plate design..one only, new construction, C4, 86-90 L98, with Aluminum T-6 as machined pulley, does require new shorter (part #K060882)belt..$195.00US plus shipping
PICTURE here:AIR PUMP ELIMINATOR >>AP#004
PIC#2
PIC#3
please contact me for more info
reference link
Last edited by korvette4u; 07-30-2005 at 07:11 PM.
#7
Drifting
Thread Starter
Member Since: Oct 2003
Location: CALGARY ab
Posts: 1,594
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sickspeedvette
I might be interested in the rear bearings, will they fit an '86?
#8
Drifting
Thread Starter
Member Since: Oct 2003
Location: CALGARY ab
Posts: 1,594
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by padrummer1
I am interested in the rollers.
I assume they were used with the factory spider. Can they be used with connecting arms for a retro fit set up?
if so, i want em'!
I assume they were used with the factory spider. Can they be used with connecting arms for a retro fit set up?
if so, i want em'!