Hood Seal Please
#1
Pro
Thread Starter
Member Since: Jan 2005
Location: Scarborough
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Hood Seal Please
Does anyone in the U.S. have an extra piece of that rubber lying around, that I can use for a hood seal. I don't know why, but I can't find any here in Toronto at Home Depot, or any other auto or home improvement store. I'm trying to avoid going to GM and paying $75.00 for a piece of 2 dollar weather stripping. I will pay for shipping. If not can someone pick up some at home depot, and I will pay the 8 bucks or whatever it is, that way you get a free hood seal. Thanks for helping, not easy being a Canadian!
Last edited by canadianguy; 03-10-2005 at 10:47 AM.
#2
Corvette C5 Enthusiast
If no one else has a piece to send you, send me a PM with you home address and the specs for the rubber and I'll pick up some and send your way. (I went the "non-DIY" mode and paid more moeny from a vendor.)
#3
Pro
Thread Starter
Member Since: Jan 2005
Location: Scarborough
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by c5BlackBeauty
If no one else has a piece to send you, send me a PM with you home address and the specs for the rubber and I'll pick up some and send your way. (I went the "non-DIY" mode and paid more moeny from a vendor.)
#4
Safety Car
Member Since: Feb 2004
Location: Rochester MN
Posts: 4,208
Likes: 0
Received 2 Likes
on
1 Post
CI 5-6-7-8 Veteran
St. Jude Donor '04-'05-'06-'07
NCM Ambassador
I have a small piece left over from the CAU version and a Home Depot across the street from my office - I can take the small peice and see what they have....
#5
Pro
Thread Starter
Member Since: Jan 2005
Location: Scarborough
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ptdrummer54
I have a small piece left over and a Home Depot across the street from my office - I can take the small peice and see what thy have....
#7
Corvette C5 Enthusiast
Originally Posted by canadianguy
Thanks ptdrummer, that would be awsome.
#8
Safety Car
Member Since: Feb 2004
Location: Rochester MN
Posts: 4,208
Likes: 0
Received 2 Likes
on
1 Post
CI 5-6-7-8 Veteran
St. Jude Donor '04-'05-'06-'07
NCM Ambassador
Nothing close at my Home Depot either, but I made sure I took measurements of the one I have. The style is like the photo below. The base (B) is 3/4" wide and the height (A) is 7/8".
#9
Pro
Thread Starter
Member Since: Jan 2005
Location: Scarborough
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ptdrummer54
Nothing close at my Home Depot either, but I made sure I took measurements of the one I have. The style is like the photo below. The base (B) is 3/4" wide and the height (A) is 7/8".
#12
Le Mans Master
Member Since: Sep 2003
Location: Just a little outside San Antonio, Texas
Posts: 6,386
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm, I just bought the hood seal thru either LAPD or WCC and it didn't look that at all. The older style I bought almost 2 years ago did.
The newer model that I just received has a 90 degree edge (where the sticky tape is located) with a curved edge on the opposing side. It fits much, much better than the older style illustrated in the above post.
Just my observations....
Oh, and the packaging promises at least 25 more HP.
The newer model that I just received has a 90 degree edge (where the sticky tape is located) with a curved edge on the opposing side. It fits much, much better than the older style illustrated in the above post.
Just my observations....
Oh, and the packaging promises at least 25 more HP.
#14
Corvette C5 Enthusiast
Originally Posted by canadianguy
That is valuable info, thanks man. Black beauty, you may be my only hope, at least I have the right measurements now.
#15
Tech Contributor
Member Since: Dec 1999
Location: Anthony TX
Posts: 32,736
Received 2,180 Likes
on
1,583 Posts
CI 6,7,8,9,11 Vet
St. Jude Donor '08
I got mine at Autozone. It is from Softseal. Here is a picture of it.
I will purchase an entire package for you and send it to you. Find someone in Canada to share it with. I think it is $12-15. US and there is enough in one package to do TWO C5 with 18" left over.
Here is something else to think about. I have an 02 Z06 and the trunk area is always collecting dirt, twigs, leaves, and water. I wanted to find a way to seal it up so, I purchased the same type of seal that is used to seal the sides of the hood to the fenders. It worked FANTASTIC!!!!!!!!!!!
Here is a couple of pictures of the install. Tell me what you think
Bill
HERE is a picture of the "SOFTSEAL" hood seal installed on front of the car
Bill Curlee
I will purchase an entire package for you and send it to you. Find someone in Canada to share it with. I think it is $12-15. US and there is enough in one package to do TWO C5 with 18" left over.
Here is something else to think about. I have an 02 Z06 and the trunk area is always collecting dirt, twigs, leaves, and water. I wanted to find a way to seal it up so, I purchased the same type of seal that is used to seal the sides of the hood to the fenders. It worked FANTASTIC!!!!!!!!!!!
Here is a couple of pictures of the install. Tell me what you think
Bill
HERE is a picture of the "SOFTSEAL" hood seal installed on front of the car
Bill Curlee
#16
Pro
Thread Starter
Member Since: Jan 2005
Location: Scarborough
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Bill Curlee
I got mine at Autozone. It is from Softseal. Here is a picture of it.
I will purchase an entire package for you and send it to you. Find someone in Canada to share it with. I think it is $12-15. US and there is enough in one package to do TWO C5 with 18" left over.
Here is something else to think about. I have an 02 Z06 and the trunk area is always collecting dirt, twigs, leaves, and water. I wanted to find a way to seal it up so, I purchased the same type of seal that is used to seal the sides of the hood to the fenders. It worked FANTASTIC!!!!!!!!!!!
Here is a couple of pictures of the install. Tell me what you think
Bill
HERE is a picture of the "SOFTSEAL" hood seal installed on front of the car
Bill Curlee
I will purchase an entire package for you and send it to you. Find someone in Canada to share it with. I think it is $12-15. US and there is enough in one package to do TWO C5 with 18" left over.
Here is something else to think about. I have an 02 Z06 and the trunk area is always collecting dirt, twigs, leaves, and water. I wanted to find a way to seal it up so, I purchased the same type of seal that is used to seal the sides of the hood to the fenders. It worked FANTASTIC!!!!!!!!!!!
Here is a couple of pictures of the install. Tell me what you think
Bill
HERE is a picture of the "SOFTSEAL" hood seal installed on front of the car
Bill Curlee
#17
Safety Car
Member Since: Feb 2004
Location: Rochester MN
Posts: 4,208
Likes: 0
Received 2 Likes
on
1 Post
CI 5-6-7-8 Veteran
St. Jude Donor '04-'05-'06-'07
NCM Ambassador
I agree Bill, great job. It almost makes me want to redo the hatch area of my coupe...
PS the shape of the weatherstripping in Bill's post is the same as what I got from LAPD..
PS the shape of the weatherstripping in Bill's post is the same as what I got from LAPD..