Brakes
#21
Burning Brakes
You can jack up the car from front or rear using a crossbeam attachment on the jack or making one out of 2X6.
HF Crossbeam attachment
http://www.harborfreight.com/steel-f...eam-60762.html
HF low profile jack.
http://www.harborfreight.com/2-ton-L...ump-68050.html
Post about jacking options.
http://forums.corvetteforum.com/c5-g...-question.html
HF Crossbeam attachment
http://www.harborfreight.com/steel-f...eam-60762.html
HF low profile jack.
http://www.harborfreight.com/2-ton-L...ump-68050.html
Post about jacking options.
http://forums.corvetteforum.com/c5-g...-question.html
Last edited by john8642; 04-19-2014 at 06:49 PM.
#22
Race Director
#24
Safety Car
Member Since: Sep 2007
Location: Sunniest city on Earth
Posts: 4,169
Likes: 0
Received 21 Likes
on
20 Posts
You can jack up the car from front or rear using a crossbeam attachment on the jack or making one out of 2X6.
HF Crossbeam attachment
http://www.harborfreight.com/steel-f...eam-60762.html
HF low profile jack.
http://www.harborfreight.com/2-ton-L...ump-68050.html
Post about jacking options.
http://forums.corvetteforum.com/c5-g...-question.html
HF Crossbeam attachment
http://www.harborfreight.com/steel-f...eam-60762.html
HF low profile jack.
http://www.harborfreight.com/2-ton-L...ump-68050.html
Post about jacking options.
http://forums.corvetteforum.com/c5-g...-question.html
#28
Safety Car
If you still have the Bilsteins I'll trade you in a second for my C6Z06 shocks!!!
My car's up on jackstands, I can get them off in a day or two...
My car's up on jackstands, I can get them off in a day or two...
#29
So far i installed the bilsteins... Not bad. Thinking about lowereing the car on stock bolts.
As far as my brakes.... Can i use just the z51 rear brackets and upgrade to the larger rotor using my stock caliper? Im still running the stock c5z06 rims and dont plan on changing them out soon. So i know i wont clear z51 brakes in the front.
My SS brake lines should be here monday. Just want to order everything and get ready for the swap.
As far as my brakes.... Can i use just the z51 rear brackets and upgrade to the larger rotor using my stock caliper? Im still running the stock c5z06 rims and dont plan on changing them out soon. So i know i wont clear z51 brakes in the front.
My SS brake lines should be here monday. Just want to order everything and get ready for the swap.
#30
Safety Car
Member Since: Sep 2007
Location: Sunniest city on Earth
Posts: 4,169
Likes: 0
Received 21 Likes
on
20 Posts
So far i installed the bilsteins... Not bad. Thinking about lowereing the car on stock bolts.
As far as my brakes.... Can i use just the z51 rear brackets and upgrade to the larger rotor using my stock caliper? Im still running the stock c5z06 rims and dont plan on changing them out soon. So i know i wont clear z51 brakes in the front.
My SS brake lines should be here monday. Just want to order everything and get ready for the swap.
As far as my brakes.... Can i use just the z51 rear brackets and upgrade to the larger rotor using my stock caliper? Im still running the stock c5z06 rims and dont plan on changing them out soon. So i know i wont clear z51 brakes in the front.
My SS brake lines should be here monday. Just want to order everything and get ready for the swap.