383 lt1 shortblock, forged eagle
#1
Racer
Thread Starter
fs:383 lt1 shortblock, forged eagle
ive got a 383 lt1 shortblock 2 bolt main with an eagle 4340 forged crank, forged h-beam rods, forged flattop pistons, with cam. there is less than 1000 break-in miles on this block. i originally bought it for a project, but decided to go with a high nickel 010 4-bolt main. it does have an oil pan. please give me your email for pics. $1900 shipped. or call me at 682-622-9662 -keith
oh and if you call or pm. you still have to obey forum rules. post your actions here. otherwise you have no place in line
oh and if you call or pm. you still have to obey forum rules. post your actions here. otherwise you have no place in line
Last edited by texasedirpvette'91; 02-24-2008 at 01:36 PM.
#2
Drifting
I would like to see pics and get as much info as possible on the buildup and when it was in the car.
gch99@embarqmail.com
gch99@embarqmail.com
#6
#11
Racer
Thread Starter
to quebec?? im sorry for not specifying. but i was only wanting to ship within the lower 48. but i will pay 200 of the shipping if you want to cover the rest. i will find out the shipping as soon as i get a little ore time. i gotta run back to work in a minute
#12
Heel & Toe
Member Since: Mar 2008
Location: scottsdale az
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
#16
Pro
Member Since: Jul 2006
Location: Cheshire Connecticut
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
#17
Racer
Thread Starter
ok, first of all. i apologize for not replying quickly. im in the army, and my schedule is very spontanious. and, not to mention, i have no internet access where i live. but, no excuses allowed. and as soon as i get the pictures off of my computer and onto a thumbdrive. to send to yall. i will. so give me two more days and i will send all pics and info to everyone. thank you for your patience. and please call me if you would like the onfo immediately
#19
Racer
Thread Starter
Pics to chadbwatts@hotmail.com
Also any background info would be useful- who built, compression, etc.
Thanks
Chad
Also any background info would be useful- who built, compression, etc.
Thanks
Chad
oh, and with 68 cc heads. you will get approximately 10.6:1 i dont know exactly what the compression is with stock lt1 heads...but im assuming low 9's. but im using 68cc on my other build
Last edited by texasedirpvette'91; 03-17-2008 at 07:47 PM.
#20
Drifting
so im assuming you are also in the army, stationed at ft. hood. thats where i am right now. small world
oh, and with 68 cc heads. you will get approximately 10.6:1 i dont know exactly what the compression is with stock lt1 heads...but im assuming low 9's. but im using 68cc on my other build
oh, and with 68 cc heads. you will get approximately 10.6:1 i dont know exactly what the compression is with stock lt1 heads...but im assuming low 9's. but im using 68cc on my other build