DIC Volume Adjustment
10-29-2006, 01:18 AM
#1
Pro
Thread Starter
DIC Volume Adjustment
This question may have been asked before, but I did a search and couldn't find anything. Is there any way to adjust the DIC volume? I find the beep too loud when pressing any of the DIC or HUD buttons.
10mm
10mm
10-29-2006, 03:05 AM
#2
Originally Posted by 10mikeymike
This question may have been asked before, but I did a search and couldn't find anything. Is there any way to adjust the DIC volume? I find the beep too loud when pressing any of the DIC or HUD buttons.
10mm
10mm
10-29-2006, 05:17 AM
#3
Team Owner
Originally Posted by shopdog
There are only two settings, loud and louder, in cars without Nav. In cars with Nav, there is only loud.
10-29-2006, 11:38 AM
#5
Question from above: "This question may have been asked before, but I did a search and couldn't find anything. Is there any way to adjust the DIC volume? I find the beep too loud when pressing any of the DIC or HUD buttons."
I don't get a chime sound when I press any of the HUD buttons on the left side. I only get chime sound on the buttons pressed on the Right side. Does anyone else get silent pressing of the left side?
No way to adjust that I have found.
I assume this is the normal situation?
I don't get a chime sound when I press any of the HUD buttons on the left side. I only get chime sound on the buttons pressed on the Right side. Does anyone else get silent pressing of the left side?
No way to adjust that I have found.
I assume this is the normal situation?
10-29-2006, 12:22 PM
#6
Team Owner
Originally Posted by C6SNOOPY
Question from above: "This question may have been asked before, but I did a search and couldn't find anything. Is there any way to adjust the DIC volume? I find the beep too loud when pressing any of the DIC or HUD buttons."
I don't get a chime sound when I press any of the HUD buttons on the left side. I only get chime sound on the buttons pressed on the Right side. Does anyone else get silent pressing of the left side?
No way to adjust that I have found.
I assume this is the normal situation?
I don't get a chime sound when I press any of the HUD buttons on the left side. I only get chime sound on the buttons pressed on the Right side. Does anyone else get silent pressing of the left side?
No way to adjust that I have found.
I assume this is the normal situation?
10-29-2006, 05:13 PM
#7
Racer
Thanks for the DIC volumn info. It helped.
A timely post. I thought the tone on the DIC was too loud, too. Thanks to this thread, followed the directions by holding selector button #6. Turns out it was set on "loud". Changed it to "normal". It is better now.
10-30-2006, 12:27 PM
#11
MONARTOR
Originally Posted by slomarsh
A timely post. I thought the tone on the DIC was too loud, too. Thanks to this thread, followed the directions by holding selector button #6. Turns out it was set on "loud". Changed it to "normal". It is better now.
10-30-2006, 04:00 PM
#12
Team Owner
Originally Posted by 6 speed Sid
What selector buttom #-6 ??
Note: this info. does not seem to be in the 2007 owner's manual.
Chime Level Adjustment
The radio is used to adjust the vehicle’s chime level.
To change the volume level of the chime, press and hold
pushbutton 6 with the ignition on and the radio power
off. The volume level will change from the normal
level to loud, and LOUD will appear on the radio display.
To change back to the default or normal setting,
press and hold pushbutton 6 again. The volume level
will change from the loud level to normal, and NORMAL
will appear on the radio display. Only one chime will
be heard when changing from the normal to the
loud setting. Each time the chime volume is changed,
three chimes will sound as an example of the new
volume selected. Removing the radio and not replacing
it with a factory radio or chime module will disable
vehicle chimes.
The radio is used to adjust the vehicle’s chime level.
To change the volume level of the chime, press and hold
pushbutton 6 with the ignition on and the radio power
off. The volume level will change from the normal
level to loud, and LOUD will appear on the radio display.
To change back to the default or normal setting,
press and hold pushbutton 6 again. The volume level
will change from the loud level to normal, and NORMAL
will appear on the radio display. Only one chime will
be heard when changing from the normal to the
loud setting. Each time the chime volume is changed,
three chimes will sound as an example of the new
volume selected. Removing the radio and not replacing
it with a factory radio or chime module will disable
vehicle chimes.
10-30-2006, 06:17 PM
#13
Le Mans Master
Member Since: Aug 2001
Location: Recovering from a tragic boating accident in Jacksonville Fl
Posts: 8,275
Likes: 0
Received 0 Likes
on
0 Posts
CI 5-6-7-8-9-10 Vet
Originally Posted by JimTN
Radio preset button no. 6. 2006 owner's manual, page 3-101.
Note: this info. does not seem to be in the 2007 owner's manual.
Note: this info. does not seem to be in the 2007 owner's manual.
10-30-2006, 06:54 PM
#14
Team Owner
Originally Posted by RedHot
That is for the alert chimes, not the DIC sound "*****"
EDIT: I just tried it and your statement is incorrect. It is for both.
Last edited by Vette_DD; 10-30-2006 at 07:00 PM.
10-30-2006, 07:07 PM
#15
Safety Car
Originally Posted by JimTN
Radio preset button no. 6. 2006 owner's manual, page 3-101.
Note: this info. does not seem to be in the 2007 owner's manual.
Note: this info. does not seem to be in the 2007 owner's manual.
I just tried it and it does indeed work
10-30-2006, 07:41 PM
#17
Melting Slicks
Originally Posted by JimTN
Radio preset button no. 6. 2006 owner's manual, page 3-101.
Note: this info. does not seem to be in the 2007 owner's manual.
Chime Level Adjustment
The radio is used to adjust the vehicle’s chime level.
To change the volume level of the chime, press and hold
pushbutton 6 with the ignition on and the radio power
off. The volume level will change from the normal
level to loud, and LOUD will appear on the radio display.
To change back to the default or normal setting,
press and hold pushbutton 6 again. The volume level
will change from the loud level to normal, and NORMAL
will appear on the radio display. Only one chime will
be heard when changing from the normal to the
loud setting. Each time the chime volume is changed,
three chimes will sound as an example of the new
volume selected. Removing the radio and not replacing
it with a factory radio or chime module will disable
vehicle chimes.
Note: this info. does not seem to be in the 2007 owner's manual.
Chime Level Adjustment
The radio is used to adjust the vehicle’s chime level.
To change the volume level of the chime, press and hold
pushbutton 6 with the ignition on and the radio power
off. The volume level will change from the normal
level to loud, and LOUD will appear on the radio display.
To change back to the default or normal setting,
press and hold pushbutton 6 again. The volume level
will change from the loud level to normal, and NORMAL
will appear on the radio display. Only one chime will
be heard when changing from the normal to the
loud setting. Each time the chime volume is changed,
three chimes will sound as an example of the new
volume selected. Removing the radio and not replacing
it with a factory radio or chime module will disable
vehicle chimes.
Thanks
10-30-2006, 08:58 PM
#19
Melting Slicks
Originally Posted by beaversstonehaven
I'm heading to the garage right NOW! I sure hope it has been on the loud setting.
