Search: Posts Made By: MDstar2
Showing results 1 to 25 of 114
Search took 1.01 seconds.
07-11-2018, 03:17 PM
Replies: 21
Views: 5,106
Posted By MDstar2

With 1.6 rockers I believe the lift is .562 on...

With 1.6 rockers I believe the lift is .562 on intake and exhaust.
07-11-2018, 12:32 PM
Replies: 21
Views: 5,106
Posted By MDstar2

I have an 89 with the Lingenfelter 211/219 cam in...

I have an 89 with the Lingenfelter 211/219 cam in it. I'm using the stock intake that has been slightly ported with Edelbrock Corvette heads. The car runs high 12's and sounds really nice....
04-06-2016, 09:26 AM
Replies: 23
Views: 3,879
Posted By MDstar2

I installed a set of Edelbrock Corvette heads,...

I installed a set of Edelbrock Corvette heads, TPIS Headers, a Lingenfelter 211/219 cam, 1.6 full rollers, gasket matched porting, and a 2400 stall converter. Mine runs high 12's with that and a PCM...
03-02-2016, 11:53 AM
Replies: 265
Views: 52,399
Posted By MDstar2

I ended up with a 10.4:1 355 with a lightly...

I ended up with a 10.4:1 355 with a lightly ported stock tpi intake with stock runners. It has Edelbrock Performer Corvette heads with Comp double springs and 1.6 pro magnum roller rockers. I...
05-11-2015, 06:39 PM
Replies: 609
Views: 397,154
Posted By MDstar2

https://cimg5.ibsrv.net/gimg/www.corvetteforum.com...

https://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1920x1080/80-screenshot_2015_04_06_12_44_04_a0dd2db1c8b687cf68db42aeeebf5a8d24bf26c2.png...
04-30-2015, 08:37 PM
Replies: 32
Views: 3,575
Posted By MDstar2

Another vote for Mickey Thompson Street Comps....

Another vote for Mickey Thompson Street Comps. Check out Performance Plus Tire in Ca. I got 2 275 and 2 315's for $655 delivered. Great deal!:rock:
04-02-2015, 09:56 PM
Replies: 27
Views: 5,247
Posted By MDstar2

https://cimg3.ibsrv.net/gimg/www.corvetteforum.com...

https://cimg3.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1124/80-20150402_214423_68312f1a3e5a8417ae4cfc194773dee6b2a98905.jpg




Up and running! Thanks again!!
04-02-2015, 05:08 PM
Replies: 27
Views: 5,247
Posted By MDstar2

I don't have the right tools to solder it. A...

I don't have the right tools to solder it. A friend of mine works with circuit boards all the time, so I'm taking it to him.

Thanks so much for your patience. I really appreciate the help. I'll...
04-02-2015, 04:29 PM
Replies: 27
Views: 5,247
Posted By MDstar2

https://cimg0.ibsrv.net/gimg/www.corvetteforum.com...

https://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1124/80-1428006464498_d1ae005c83cc33a14bf9736cff5c148792ba9e3c.jpg




Me thinks I found the problem
04-02-2015, 04:16 PM
Replies: 27
Views: 5,247
Posted By MDstar2

https://cimg4.ibsrv.net/gimg/www.corvetteforum.com...

https://cimg4.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1124/80-1428005882161_d4dc96b0223cda24108643eb5ea9bc9e92db9a69.jpg


Ok, so when I pull both bulbs I only have power on one side....
03-30-2015, 08:12 PM
Replies: 27
Views: 5,247
Posted By MDstar2

Ok, I'll let you know what I find. I hope to be...

Ok, I'll let you know what I find. I hope to be able to check it this week. The other bulb was installed when I had power on both sides of the passenger side socket. The ground was at the base of the...
03-29-2015, 02:39 PM
Replies: 27
Views: 5,247
Posted By MDstar2

All of my interior lights are on except the cargo...

All of my interior lights are on except the cargo lights. The tire light didn't work either. Someone has done some monkey fixing to the left of the rear hatch ground switch. Not sure if that makes a...
03-28-2015, 10:12 PM
Replies: 4
Views: 1,584
Posted By MDstar2

I have a mild edge in my vette. It does a nice...

I have a mild edge in my vette. It does a nice job. Lock up works great. Runs 12.90's on a basically stock 355 with a lpe 74211 cam. Feels a little tighter than I was expecting but I'm not making the...
03-28-2015, 08:15 PM
Replies: 27
Views: 5,247
Posted By MDstar2

Ok....... I apologize. I was wrong. After tearing...

Ok....... I apologize. I was wrong. After tearing the freaking car completely apart, it does have 12 volts to the lights. On both sides of the sockets there is 12 volts. Even with the bulb out, there...
03-04-2015, 06:23 AM
Replies: 27
Views: 5,247
Posted By MDstar2

Thanks Cliff. I have never seen that light...

Thanks Cliff. I have never seen that light before. I'll check it out in few weeks. Thank you all for your help! It's appreciated.
03-02-2015, 05:30 PM
Replies: 27
Views: 5,247
Posted By MDstar2

Thanks so much for the info! That's exactly what...

Thanks so much for the info! That's exactly what I needed. The car was beat and hacked when I got it. All of the wires were cut when someone replaced the radio with an aftermarket unit. So who knows....
03-02-2015, 03:39 PM
Replies: 27
Views: 5,247
Posted By MDstar2

Right now the car is parked in the back of the...

Right now the car is parked in the back of the garage against the wall. I'll bring it back out when the snow goes away. I have looked for the spare tire light and have never seen anything lit up...
03-02-2015, 06:04 AM
Replies: 27
Views: 5,247
Posted By MDstar2

Thanks for the reply. Power antenna does work...

Thanks for the reply. Power antenna does work fine. I have not seen the spare tire light either. It's just the spare tire and cargo lights. No power at the cargo light sockets.
03-01-2015, 03:45 PM
Replies: 27
Views: 5,247
Posted By MDstar2

I don't have power at the lights. I have tested...

I don't have power at the lights. I have tested the ground through the plunger and it's working. I was looking for a schematic to find where they get their power from.
02-28-2015, 08:10 PM
Replies: 27
Views: 5,247
Posted By MDstar2

Cargo hatch lights don't work

Hey all. My cargo lights don't work on my 89. The hatch release works, all of the other interior lights work. The interior lights come on when each door is open and with the headlight/dome light...
02-17-2015, 07:04 PM
Replies: 26
Views: 5,849
Posted By MDstar2

I had to wait 5 weeks for TPIS to make my...

I had to wait 5 weeks for TPIS to make my headers. That was miserable. They fit like a glove and are a nice quality piece though. It was worth the wait for me.
02-15-2015, 10:45 PM
Replies: 25
Views: 8,412
Posted By MDstar2

I just left it in drive and let the trans do it's...

I just left it in drive and let the trans do it's thing. It shifts about 5100.
02-13-2015, 12:31 PM
Replies: 25
Views: 8,412
Posted By MDstar2

Worn out drag radials

Worn out drag radials
02-12-2015, 08:45 PM
Replies: 25
Views: 8,412
Posted By MDstar2

I definitely plan on that. It gets 25mpg on the...

I definitely plan on that. It gets 25mpg on the highway and runs really smooth everywhere. I was shocked for it being mail order. I'm thinking about a first tpi system for it. If I decide to do that,...
02-12-2015, 08:30 PM
Replies: 18
Views: 3,937
Posted By MDstar2

I found the issue with my surge. The IAC was...

I found the issue with my surge. The IAC was loose. Nice vacuum leak cold, got better as it warmed up.
Showing results 1 to 25 of 114
 


 
Forum Jump


All times are GMT -4. The time now is 08:32 AM.