Search: Posts Made By: Dameon
Showing results 1 to 25 of 92
Search took 1.01 seconds.
03-05-2018, 05:26 PM
Replies: 10
Views: 755
Posted By Dameon

I was always careful about that. Filling the...

I was always careful about that. Filling the filter before reinstalling and such. Unless there is/was a failure in the oil pump. I've never seen an indication (gauge or error code) indicating low...
03-05-2018, 04:13 PM
Replies: 10
Views: 755
Posted By Dameon

I send my oil off to be tested if I suspect a...

I send my oil off to be tested if I suspect a problem. This is a problem. I don't send it off every time I change the oil on one of my vehicles.

Bearings are one of the few things that are copper...
03-05-2018, 12:53 PM
Replies: 10
Views: 755
Posted By Dameon

Oh, I had a local performance shop (I trust)...

Oh, I had a local performance shop (I trust) perform the wiggle test about 5 years ago (when I first learned about it) and at that time it was well within spec. Probably 5K since then.

I suspect...
03-05-2018, 12:50 PM
Replies: 10
Views: 755
Posted By Dameon

2009 with 19K has motor concern

Low mileage car I've owned since new (10 miles on the odo). I changed the oil a week ago and ran it through a coffee filter, as I always do because I'm paranoid, and it was clean. I have two magnetic...
10-05-2015, 10:59 AM
Replies: 22
Views: 19,972
Posted By Dameon

Same here. The notice came with a reimbursement...

Same here. The notice came with a reimbursement form if you've already had the work performed.

I have to wonder if it is covered as many times as it occurs until 10 years/120K? If my master fails...
10-02-2015, 05:03 PM
Replies: 22
Views: 19,972
Posted By Dameon

I retrieved my car last night and drove it around...

I retrieved my car last night and drove it around today... everything seems to be functioning quite normally again.

My service adviser seemed quite adamant that the slave cylinder was NOT...
09-28-2015, 06:04 PM
Replies: 22
Views: 19,972
Posted By Dameon

I heard from the Service Advisor earlier today...

I heard from the Service Advisor earlier today and he located a warranty extension for the clutch system that covers the actuator components (presumably the clutch cylinders) until 2019 or 120K. He...
09-28-2015, 11:43 AM
Replies: 22
Views: 19,972
Posted By Dameon

It probably won't be the last we hear either. If...

It probably won't be the last we hear either. If the issue is still happening, then the information is still relevant. I expect the C7 won't have this same problem.


I would expect any wear...
09-24-2015, 06:36 PM
Replies: 22
Views: 19,972
Posted By Dameon

Kelly, it is very refreshing to see a...

Kelly, it is very refreshing to see a representative with Chevrolet browsing the forum.

I know this is an old thread, but my Z06 is currently in the shop for this exact same problem. I "replaced"...
06-09-2015, 10:11 PM
Replies: 7
Views: 1,210
Posted By Dameon

Why not Minot? Freezin's the reason. Glad I never...

Why not Minot? Freezin's the reason. Glad I never did a stint there. Offutt was bad enough.


Thanks for the link... reading through it now.
06-09-2015, 10:04 PM
Replies: 7
Views: 1,210
Posted By Dameon

Yes, I am doing fluid maintenance, probably more...

Yes, I am doing fluid maintenance, probably more so than I need to. I bought the fluids to change the clutch fluid (yes, using the Ranger method) about 2 months ago. I just haven't gotten to it yet....
06-09-2015, 12:17 PM
Replies: 7
Views: 1,210
Posted By Dameon

2009 Z06 Clutch Issue

Before I start tearing into things, I'll like to bounce the issue off the forum to garner some opinions (should be plenty here :lol:)

2009 Z06, 12K miles, driven on sunny days and, even then,...
03-19-2013, 02:45 PM
Replies: 343
Views: 33,132
Posted By Dameon

Okay, I read through this whole 13 page thread...

Okay, I read through this whole 13 page thread (as well as many other related threads) and have decided it might be better to just order replacement headlights. Mine are factory installed with the...
Forum: Southeast
10-31-2012, 01:15 PM
Replies: 64
Views: 2,045
Posted By Dameon

I've been hoping someone would have a car "Dyno...

I've been hoping someone would have a car "Dyno Day" in my area. I've attended several for motorcycles, but no cars as of yet.

I don't want to just throw Ragin' Racin's (http://raginracin.com)...
03-06-2012, 10:19 AM
Replies: 8
Views: 740
Posted By Dameon

I wish they were. They are about 100 miles away....

I wish they were. They are about 100 miles away. I bought the car there, but they are too far to go for "simple" service. I really enjoyed my overall experience with them... from sales, to managers,...
03-05-2012, 07:12 PM
Replies: 8
Views: 740
Posted By Dameon

Thanks for the link! :thumbs: Calling the...

Thanks for the link! :thumbs:

Calling the dealer in the morning. Do you think they will just give me the lights to replace them myself? I don't trust the service department. I had it all happen......
03-05-2012, 06:21 PM
Replies: 8
Views: 740
Posted By Dameon

Thanks for the (multiple) confirmations! Is...

Thanks for the (multiple) confirmations!

Is there a TSB or recall number I can reference to speed things along?
03-05-2012, 10:40 AM
Replies: 8
Views: 740
Posted By Dameon

2009 Z06 Headlights with Inclusions / Micro Cracks / Fractures

I did a forum search for "2009 headlights" and read through the first 5 pages of responses, but nothing helpful.

Has anyone else noticed this issue? Vehicle is kept under cover in garage 90% of...
09-19-2011, 11:47 AM
Replies: 21
Views: 1,134
Posted By Dameon

Yep, tramlining. Same here. Pretty disconcerting...

Yep, tramlining. Same here. Pretty disconcerting feeling, especially in Southern LA (not L.A.) where the roads are normally sub par.
09-16-2011, 05:14 PM
Replies: 19
Views: 1,225
Posted By Dameon

The weave on the carbon fiber doesn't look tight...

The weave on the carbon fiber doesn't look tight enough which causes small gaps when the resin is laid. As the resin dries, it sags into those pockets. Notice where all the pinholes are... right over...
09-16-2011, 03:51 PM
Replies: 27
Views: 12,177
Posted By Dameon

Although the Prestone Synthetic DOT-4 is cheaper,...

Although the Prestone Synthetic DOT-4 is cheaper, and of the "same" quality, while my car is under factory warranty, I'm not giving the dealer any ammo in the event of a failure. Today, I paid $9.49...
09-13-2011, 01:18 PM
Replies: 50
Views: 5,067
Posted By Dameon

Can I get a large sign without the holes?

Can I get a large sign without the holes?
09-13-2011, 12:25 PM
Replies: 23
Views: 2,230
Posted By Dameon

Same for me please. I would bring the car up...

Same for me please.

I would bring the car up from Lafayette and leave it with you. How long would the install and tune take?

Please quote with separate pricing for material and labor. I would...
09-13-2011, 09:48 AM
Replies: 9
Views: 2,791
Posted By Dameon

That's what I'll order. Before I do, I have a...

That's what I'll order. Before I do, I have a question on another product. I'd like to order both at once and save on shipping.

I've never liked the orange DRL's on the Corvette. Every other car...
09-12-2011, 02:25 PM
Replies: 17
Views: 952
Posted By Dameon

Works great in TX (with front plates). I...

Works great in TX (with front plates).

I don't think you'd have to pay royalties to the 1986 Beastie Boys album cover. I don't think they came up with the idea.
...
Showing results 1 to 25 of 92
 


 
Forum Jump


All times are GMT -4. The time now is 02:52 PM.