Originally Posted by c4gone
(Post 1587092324)
yeah me too. I looked for 4 years for one. mine is the only one I have seen. I love that car
http://img.photobucket.com/albums/v1.../ABShow061.jpg |
wow that's one immaculate car right there!!!
yes I really want to do the rear bottom black. I think it would look awesome!! headers also would be nice |
Very nice :thumbs:
|
Nice car!
|
I like what you have done to your car, Sharp !!!!
|
beautiful car and I do love the white as you don't see too many of them !
too bad someone jacked up the car wrong but you might be able to fix it by loosening the bolt then push the fender in as much as you can and tighten the bolt ! I used a bigger washer on mine to hold it properly and its been good for over a year now ! |
Looks great! Congrats
|
Originally Posted by Sids04
(Post 1587091848)
Awesome ! Of course I have an FRC bias,..
|
That is one SHARP car C4, love the white Vette's!
|
Gorgeous.... white FRC's are the only C5s I like more than my black Z06. :thumbs: Very very nice!!!
-- VPP |
Looks great! How much did you lower it?
|
Arctic White FRC here! Friendly heads up... you can fix that front fender. Get the front end up on jackstands, and pull all the bolts on that bottom edge holding the fender on. Get some large washers, and put the bolts back in with the washers in place. Don't tighten them just yet. You can use your hands to line the fender back up, and once you have it in the right position use one hand to hold it and the other to tighten the bolts. Don't crank the piss out of it, just get them nice and snug. I did this to mine 10 years ago, and haven't had an issue since.
|
The FRC and Z06 are awesome looking cars.
|
Very nice.:thumbs:
|
I like the white too. Nice looking car. Enjoy.:cheers:
|
Originally Posted by Mike94ZLT1
(Post 1587096692)
Arctic White FRC here! Friendly heads up... you can fix that front fender. Get the front end up on jackstands, and pull all the bolts on that bottom edge holding the fender on. Get some large washers, and put the bolts back in with the washers in place. Don't tighten them just yet. You can use your hands to line the fender back up, and once you have it in the right position use one hand to hold it and the other to tighten the bolts. Don't crank the piss out of it, just get them nice and snug. I did this to mine 10 years ago, and haven't had an issue since.
|
Good stuff Maynard! :cheers:
|
Nice.
|
Originally Posted by chassed
(Post 1587093355)
It needs Tint, gloss black C6 Z06 wheels and black rear Lower facia, rear Z06 brake ducts.
DSTURBD |
That is a beautiful car! I really like the C6 wheels.
|
All times are GMT -4. The time now is 01:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands