I'm in need of right front fender in Silver color for a C5. do you have one, what is the cost and shipping to 94553. Thanks Marc
|
My request is not a big dollar high demand item but mine broke and I need to replace it. The latching mechanism for the center arm rest is broken. the arm rest has a plastic hook that closes and latches into a plastic "reciever". The "reciever" snaps into the frame and holds the arm rest closed. I need the "reciever", if you'd sell it.
|
Originally Posted by gippy87
(Post 1584267966)
im in johnston RI. Im sure shipping is a bitch. Dont know if it meets the size requirements but ive had great success using grey hound to ship large items at great rates.
|
I snapped one of the tabs on my Lic. Plate surround/bracket. Do you have it and what kind of condition is it in?
|
Do you have ac parts ( vacuum lines, compressor, controls, and the power brake booster? Other parts too.
|
Originally Posted by Legacy Z06
(Post 1584321146)
No rush on my end. What will you be asking for it ?
Originally Posted by BABYBUGY
(Post 1584322066)
(On the 03 Z06 does it have stock exhaust? you still have exhaust H-pipe with cats? If so how much ? and I will come pick up if price is right.
thanks) Do you still have these ????
Originally Posted by LT194CamaroZ
(Post 1584322267)
Price on the silver front bumper, also the headlight covers and left front fender shipped to 32778
Originally Posted by 97C5inSD
(Post 1584322421)
Found the cords so how much for a pair of seats
Originally Posted by Walrus_07
(Post 1584322816)
Do u have the z06 side skirts still
Originally Posted by fisher auto
(Post 1584324185)
Marc, can you get a pic here or fisherauto1@verizon.net how is the condition???
Originally Posted by T-TOP TOM
(Post 1584333132)
I am looking for a left rear quarter panel in quicksilver for a conv. If you have one let me know shape it is in and price and phone # I can call and best time to call. Thanks, Tom
Originally Posted by 95wht6spd
(Post 1584333244)
Drivers side outer A pillar and top plastic drip rail piece? From z06
Originally Posted by 9lives
(Post 1584335375)
Quote:
Originally Posted by 9lives How much for a A/C compressor with the bracket shipped to 77093 Ac compressor w/bracket $135 shipped. Does this come with both the idler pulley and belt tensioner?
Originally Posted by Toxicscream
(Post 1584339240)
I'm am in the need for a passenger side manual seat slider bar, so I may be able to adjust the seat. I have heard that the C5 bar will fit in a C6. Do you have one? I just need the adjuster bar only but GM sells the seat rails with it. Would you sell just the slider bar?
Thank You |
Originally Posted by 5angell
(Post 1584340866)
I'm in need of right front fender in Silver color for a C5. do you have one, what is the cost and shipping to 94553. Thanks Marc
Originally Posted by GeorgeZNJ
(Post 1584344715)
My request is not a big dollar high demand item but mine broke and I need to replace it. The latching mechanism for the center arm rest is broken. the arm rest has a plastic hook that closes and latches into a plastic "reciever". The "reciever" snaps into the frame and holds the arm rest closed. I need the "reciever", if you'd sell it.
Originally Posted by dskeys63
(Post 1584345412)
Hey, Im in east prov. Do you have air cond. Parts and power brake Booster?
Originally Posted by chasboy
(Post 1584347461)
I snapped one of the tabs on my Lic. Plate surround/bracket. Do you have it and what kind of condition is it in?
Originally Posted by dskeys63
(Post 1584349199)
Do you have ac parts ( vacuum lines, compressor, controls, and the power brake booster? Other parts too.
|
stock 6spd leather shift knob?
|
Originally Posted by XplicitPerformance
(Post 1584353968)
stock 6spd leather shift knob?
|
Originally Posted by Marc@Vettenuts.net
(Post 1584351876)
For a power seat? [IMG]http://i1275.photobucket.com/albums/...psa75128fa.png[/IMG] |
Originally Posted by Marc@Vettenuts.net
(Post 1584353581)
Already sold both front fenders.
$11 shipped. :cheers: Yes we have all parts you need in stock and can shio to you. Email me a list, same as my screen name. We sell new ones here: Rear license plate surround Yes we have it all in stock. Email me a list, same as my screen name. |
PM sent on various parts
|
Still have the Auto 4L60E for $588? if so, how much shipped to 88101?
|
Another smooth transaction with Marc!! Highly recommend!
|
I am looking for the 3 compartment covers that go in the trunk. I have an 01 vert with light oak interior.
|
Just looking for a clean set of sport seats that will fit a 99 car. Zip is 57355 for shipping quoute
|
[QUOTE=Toxicscream;1584355866]No Sir, looking for the manual Seat bar. it is the one people remove to install fire extinguishers.
We do not have any in stock.
Originally Posted by GeorgeZNJ
(Post 1584358447)
11$ shipped. I'll call the shop tomorrow, Marc
Originally Posted by C5DEMON
(Post 1584358740)
Still have the Auto 4L60E for $588? if so, how much shipped to 88101?
Originally Posted by Noma01
(Post 1584359261)
Another smooth transaction with Marc!! Highly recommend!
Originally Posted by Chanda's Vette
(Post 1584359470)
I am looking for the 3 compartment covers that go in the trunk. I have an 01 vert with light oak interior.
Originally Posted by 97C5inSD
(Post 1584360715)
Just looking for a clean set of sport seats that will fit a 99 car. Zip is 57355 for shipping quoute
|
I'm looking for full front and rear suspension if you have any. I'll basically need everything except the differential in the rear and everything in the front. It's not going into a corvette. I'm guessing you see a few corvettes and I'm not on a tight time schedule so get ahold of me.
thank you -jake |
You have a gas cap release switch for inside the car? The one that sits under the center console.
|
Originally Posted by Fkns10
(Post 1584362835)
I'm looking for full front and rear suspension if you have any. I'll basically need everything except the differential in the rear and everything in the front. It's not going into a corvette. I'm guessing you see a few corvettes and I'm not on a tight time schedule so get ahold of me.
thank you -jake
Originally Posted by Qweklain
(Post 1584364465)
You have a gas cap release switch for inside the car? The one that sits under the center console.
Yes we do for $12 shipped. |
I need the front skid plate bars if you have any.
http://www.trademotion.com/media/ima.../C/CF97018.gif number 4 |
Originally Posted by XplicitPerformance
(Post 1584365459)
I need the front skid plate bars if you have any.
http://www.trademotion.com/media/ima.../C/CF97018.gif number 4 |
Originally Posted by Marc@Vettenuts.net
(Post 1584365604)
We have one nice used one in stock for $220 shipped.
Also do you have a center console arm rest padded vinyl? How about a good front bumper cover? Need one as well. |
Originally Posted by Qweklain
(Post 1584364465)
You have a gas cap release switch for inside the car? The one that sits under the center console.
Originally Posted by Marc@Vettenuts.net
(Post 1584365191)
Yes we do for $12 shipped.
Edit: Do you also have the door reflector for the passenger side? Mine just fell out LOL. Had a broken tab apparently... |
Front tag filler any color.
|
Originally Posted by Marc@Vettenuts.net
(Post 1584361229)
We have some nice passengers but no real nice drivers. So what for the best pair thn I guess a new cover is not the end of the world |
Hood liner?
Do you have a hood liner available? I'm in Dallas.
|
Do you have a Glove box by any chance?
|
Originally Posted by XplicitPerformance
(Post 1584365631)
If you can match or beat the price I found on the ebay unit I will give you the business. It was 190$ shipped on Ebay.
Also do you have a center console arm rest padded vinyl? How about a good front bumper cover? Need one as well.
Originally Posted by Qweklain
(Post 1584367065)
I bought a few items from you before. Want me to just paypal it? Although I will need this shipped to my work residence in IL, not my home address in MN.
Edit: Do you also have the door reflector for the passenger side? Mine just fell out LOL. Had a broken tab apparently...
Originally Posted by Dragsterguy
(Post 1584367132)
Front tag filler any color.
Originally Posted by 97C5inSD
(Post 1584367479)
So what for the best pair thn I guess a new cover is not the end of the world
Originally Posted by flboyd
(Post 1584368129)
Do you have a hood liner available? I'm in Dallas.
Originally Posted by 98c5vett
(Post 1584369249)
Do you have a Glove box by any chance?
|
Happen to have a passenger side door window/belt molding?
|
Originally Posted by frankthatank
(Post 1584369980)
Happen to have a passenger side door window/belt molding?
|
Cowl for 01 base
Looking for the cowl cover . 01 base C5
Thanks |
do you have a parking brake assembly, mine will no longer stay up on its own.
|
Car is 99 frc no memory or telescope
|
Originally Posted by lchase13
(Post 1584371574)
Looking for the cowl cover . 01 base C5
Thanks
Originally Posted by m6 c5
(Post 1584371760)
do you have a parking brake assembly, mine will no longer stay up on its own.
Originally Posted by 97C5inSD
(Post 1584372489)
Car is 99 frc no memory or telescope
615-896-6100 |
I have a 98 coupe.
I need Hood Front bumper Rt Fender Rt Door, shell is fine Rt Quarter Rt rocker panel Rt Light assembly Rt inner fender. |
How much for a license plate filler/cover? Shipped to houston tx 77074
|
Oh, one more thing. Do you have a driver side temp sensor cover? The one that just snaps in.
|
Originally Posted by Windsma
(Post 1584373056)
I have a 98 coupe.
I need Hood Front bumper Rt Fender Rt Door, shell is fine Rt Quarter Rt rocker panel Rt Light assembly Rt inner fender.
Originally Posted by dopefedz
(Post 1584375252)
How much for a license plate filler/cover? Shipped to houston tx 77074
Order here: http://www.vettenuts.net/index.php?l...t_detail&p=896
Originally Posted by Qweklain
(Post 1584375643)
Oh, one more thing. Do you have a driver side temp sensor cover? The one that just snaps in.
|
Ok man i am really lazy, I tried to read all thru but just couldn't do it.
Do you have a passenger side Sun Visor available? How much shipped to dallas? Sorry for the laziness |
Originally Posted by XplicitPerformance
(Post 1584365631)
If you can match or beat the price I found on the ebay unit I will give you the business. It was 190$ shipped on Ebay.
Also do you have a center console arm rest padded vinyl? How about a good front bumper cover? Need one as well. |
Originally Posted by Bailout13500
(Post 1584380836)
Ok man i am really lazy, I tried to read all thru but just couldn't do it.
Do you have a passenger side Sun Visor available? How much shipped to dallas? Sorry for the laziness |
im looking for the piece that holds the headlight lid on the driver side of a 2003. One of the tabs is broken towards the corner front. how much shipped to 33126
|
PM sent
|
Originally Posted by Qweklain
(Post 1584375643)
Oh, one more thing. Do you have a driver side temp sensor cover? The one that just snaps in.
Originally Posted by Marc@Vettenuts.net
(Post 1584380557)
Sold out will have one soon.
|
Do you have a Water pump? i also need the bracket that holds the ac compressor with the idler and belt tensioner shipped to 77093
|
Originally Posted by 9lives
(Post 1584390840)
Do you have a Water pump? i also need the bracket that holds the ac compressor with the idler and belt tensioner shipped to 77093
|
I have a Silver 2004 Corvette...looking for a front license plate filler. If you have one, how much shipped to 98117? Thanks.
-Denny |
Sorry, too many pages to go through each response. ZO6 front brake screens and rear brake duct assemblies available?
|
Great vender
A great vender to deal with. Kept well informed on the order very quick on shipping out my quarter panel and it was in great shape just as described. Thanks, Tom:willy:
|
2004 Center console lid & the lid that slides over the ashtray /cig compartment zip 79607
Thanks!! |
received my pallet of front end parts Thur. thanks Tom for the great service and quality parts at a good price.
|
do you have the stock cats?
|
Originally Posted by D'04vette
(Post 1584393361)
I have a Silver 2004 Corvette...looking for a front license plate filler. If you have one, how much shipped to 98117? Thanks.
-Denny
Originally Posted by Jack Bauer
(Post 1584393765)
Sorry, too many pages to go through each response. ZO6 front brake screens and rear brake duct assemblies available?
Originally Posted by T-TOP TOM
(Post 1584394676)
A great vender to deal with. Kept well informed on the order very quick on shipping out my quarter panel and it was in great shape just as described. Thanks, Tom:willy:
Originally Posted by Noma01
(Post 1584394772)
2004 Center console lid & the lid that slides over the ashtray /cig compartment zip 79607
Thanks!!
Originally Posted by Stang-etr96
(Post 1584398638)
received my pallet of front end parts Thur. thanks Tom for the great service and quality parts at a good price.
Originally Posted by ETPhoneHome
(Post 1584401220)
do you have the stock cats?
|
What ever happened to that 99 ebcm?
Yes I read all 8 pages!:eek: |
Looking for oil dipstick and tube from 01-04 or Z06.
|
i need that pewter drivers side headlight cover if it is still available and not broken. I also need a pair of sun visors if you have them..... price with shipping to 63088 please
Thanks |
wheels from 'vert
Marc,
If you're willing to ship to Canada, maybe we can work something out. They look great! Rod. |
How much for the Vararam kit?
|
Front leaf sping shipped to 20659.
|
Originally Posted by RetiredSFC 97
(Post 1584403787)
What ever happened to that 99 ebcm?
Yes I read all 8 pages!:eek:
Originally Posted by zr1-2go
(Post 1584403850)
Looking for oil dipstick and tube from 01-04 or Z06.
Originally Posted by krzytrain
(Post 1584404601)
i need that pewter drivers side headlight cover if it is still available and not broken. I also need a pair of sun visors if you have them..... price with shipping to 63088 please
Thanks
Originally Posted by rod venables
(Post 1584407873)
Marc,
If you're willing to ship to Canada, maybe we can work something out. They look great! Rod.
Originally Posted by Mr. Sinister
(Post 1584408738)
How much for the Vararam kit?
Originally Posted by mhunter1788
(Post 1584410113)
Front leaf sping shipped to 20659.
|
rear calipers and brackets zo6 preferred shipped to 78634
|
Originally Posted by Marc@Vettenuts.net
(Post 1584402999)
I have new front bumper screens for $89 and do you want the complete rear brake cooling system: outer screens, inner ducts and inner fender liners?
|
Looking for (aluminum housing) power steering pump and reservoir to take a few ounces off an older vette. KC Missouri area. Thanks.
|
hey man...do you still have the rear sway bar end links from the 03 z?
|
How much for a front and rear bumper covers and a driver front fender? Color doesn't matter.
|
Originally Posted by 260B4U
(Post 1584415570)
rear calipers and brackets zo6 preferred shipped to 78634
Originally Posted by sean.b
(Post 1584416055)
I didnt see where anybody responded picking these up - but I'd like the rear brake cooling setup, provided it's reasonable with market prices.
Originally Posted by 69427
(Post 1584417534)
Looking for (aluminum housing) power steering pump and reservoir to take a few ounces off an older vette. KC Missouri area. Thanks.
Originally Posted by jmuck
(Post 1584419585)
How much for a front and rear bumper covers and a driver front fender? Color doesn't matter.
|
any z06 front bumper mesh grille inserts?
|
headliner for z06 shipped to 26105? Thanks, also curious on the rear diff as well. Could pick up or whatever. please let me know...thanks again
|
Wtb stock 02+ ls6 cam and springs. ... My cousin is looking for one Please text him at 956-545-8966. Shipping to 78521.
|
Originally Posted by Marc@Vettenuts.net
(Post 1584419688)
$
Sold out of front bumpers. Rear bumpers are $225, what side FF are you needing? How about a 6spd out of 01-04 Z06? |
Originally Posted by XplicitPerformance
(Post 1584422249)
any z06 front bumper mesh grille inserts?
Originally Posted by cody123
(Post 1584423778)
headliner for z06 shipped to 26105? Thanks, also curious on the rear diff as well. Could pick up or whatever. please let me know...thanks again
Originally Posted by camaro350
(Post 1584426253)
Wtb stock 02+ ls6 cam and springs. ... My cousin is looking for one Please text him at 956-545-8966. Shipping to 78521.
Originally Posted by jmuck
(Post 1584430222)
Thanks. Driver front fender.
How about a 6spd out of 01-04 Z06? |
Looking for a pair of nice sunvisors and a pair of headlight bezels. Anything?
|
Have any performance parts for a 01 z
|
how much for the rear center console armrest section or just the hinge and latch (previous owner seemed to have taken a knive/prybar to mine so the hinge and latch is all fubar. )
climate control temperature sensor cover and the rear license plate fame all shipped to 85741 |
looking for the inner pcm bracket
price shipped to 83607 there about 20ish from the dealer and 12 online plus shipping wondering if you can beat |
Free bump. Received parts quickly. Pleasure doing business. Will do business again
|
Originally Posted by Marc@Vettenuts.net
(Post 1584462214)
We do have some new ones in stock for $95.99 shipped. They are not OEM but look just like them.
|
Originally Posted by c5BlackBeauty
(Post 1584464413)
Looking for a pair of nice sunvisors and a pair of headlight bezels. Anything?
Here is a link to headlight bezels: Headlights and Components
Originally Posted by C5zblast
(Post 1584464460)
Have any performance parts for a 01 z
Originally Posted by Dange
(Post 1584464633)
how much for the rear center console armrest section or just the hinge and latch (previous owner seemed to have taken a knive/prybar to mine so the hinge and latch is all fubar. )
climate control temperature sensor cover and the rear license plate fame all shipped to 85741 License plate frame new: $26 Temp Sensor Cover $18 Shipping $18
Originally Posted by Justinduhhhh
(Post 1584467042)
looking for the inner pcm bracket
price shipped to 83607 there about 20ish from the dealer and 12 online plus shipping wondering if you can beat
Originally Posted by Coppertop8705
(Post 1584470514)
Free bump. Received parts quickly. Pleasure doing business. Will do business again
Originally Posted by XplicitPerformance
(Post 1584470525)
is that for both? Have a link?
|
I just made a post about this, but it's worth a shot to ask here:
http://forums.corvetteforum.com/c5-p...post1584471894 |
aftermarket x-pipe ?
I am looking for aftermarket x-pipe for my c5 any chance you have one.
|
any rear diff's left for 99 c5 ?
|
Black Plastic Dead Pedal
Any chance ya have one?
|
hey you never responded - looking for left side view mirror.. let me know. black if possible..
|
Is the AT 4L60E still available?
|
abs module on the 01 or 03?
|
I'm looking for the front center air deflector with hardware. Do you have one in good shape??
|
Also, I need the driver's side window regulator and possibly the window glass as well
|
Alternator and bracket and will it work on my 02?
the rubber cap that fits over the manual raising mechanism on the headlight assembley? |
Originally Posted by Renxwar
(Post 1584471925)
I just made a post about this, but it's worth a shot to ask here:
http://forums.corvetteforum.com/c5-p...post1584471894
Originally Posted by Earl Roth
(Post 1584473009)
I am looking for aftermarket x-pipe for my c5 any chance you have one.
Originally Posted by yoymon
(Post 1584474981)
any rear diff's left for 99 c5 ?
Originally Posted by ZimC5
(Post 1584475132)
Any chance ya have one?
Originally Posted by directnosfogger
(Post 1584475939)
hey you never responded - looking for left side view mirror.. let me know. black if possible..
Originally Posted by PilotofCorvette
(Post 1584476057)
Is the AT 4L60E still available?
Originally Posted by Chicago1
(Post 1584478164)
abs module on the 01 or 03?
Originally Posted by jd_black_00
(Post 1584479525)
I'm looking for the front center air deflector with hardware. Do you have one in good shape??
Originally Posted by jd_black_00
(Post 1584479554)
Also, I need the driver's side window regulator and possibly the window glass as well
Originally Posted by ronsrods222362
(Post 1584489380)
Alternator and bracket and will it work on my 02?
the rubber cap that fits over the manual raising mechanism on the headlight assembley? |
z06 Speedline 10.5 x 18 need 2
I have decided to go with the z06 speedline wheel.
Would you happen to have two 10.5 X 18 for sale ?????? Thank you |
Marc, PM sent. Thanks.
|
Looking for a traction control button for a 2000 Corvette, any chance you have one?
|
PM Sent
|
Originally Posted by seattime
(Post 1584491378)
I have decided to go with the z06 speedline wheel.
Would you happen to have two 10.5 X 18 for sale ?????? Thank you
Originally Posted by Glenn Jenne
(Post 1584491980)
Marc, PM sent. Thanks.
Originally Posted by apexman
(Post 1584495598)
Looking for a traction control button for a 2000 Corvette, any chance you have one?
Originally Posted by LastC3AZ
(Post 1584499360)
PM Sent
|
01+ TPMS/FOB receiver w/harness?
|
Can you PM me prices for an A/C condenser, radiator, black door panels (driver, passenger, or both), and sun visors (if you still have them)?
|
Price for both headlight bracket assembly's only, don't need housings or lids etc.. shipped to 33777.
Thanks. |
z06 tire inflation kit for C5
Would you have z06 GM tire inflation kit that came with the Z06's, and if you do How much would you want for it?
Thank You, John T |
Do you have a passenger AIR tube (emission system) from an 01-04 Vette? I am in zip code 19063 for shipping purposes if you have one available.
|
All times are GMT -4. The time now is 02:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands