PARTING OUT 3 Vettes: 03 Z06, 01 Vert, 99 Coupe
02/22/2018
We just parted out 3 C5 Coupes this week. Two were extremely low mile with excellent parts so let us know what you need because we have it. Please email me for the best response rate. Marc marc@vettenuts.net 615-896-6100 https://cimg2.ibsrv.net/gimg/www.cor...d9ed7969cb.jpg https://cimg6.ibsrv.net/gimg/www.cor...3e39d3c9b.jpeg https://cimg8.ibsrv.net/gimg/www.cor...82b1ba6b4.jpeg https://cimg1.ibsrv.net/gimg/www.cor...2215273aea.jpg https://cimg2.ibsrv.net/gimg/www.cor...fbea8d3a9b.jpg https://cimg3.ibsrv.net/gimg/www.cor...9ea00bde4b.jpg https://cimg4.ibsrv.net/gimg/www.cor...03c351b9bb.jpg |
How much for the lower compartment carpet and back wall carpet out of the Z06?
|
do you have a good radio bezel for sale? black? how much? thanks!
|
Originally Posted by JeremiahsC5
(Post 1584265944)
How much for the lower compartment carpet and back wall carpet out of the Z06?
Originally Posted by GuLuMoNeY
(Post 1584266111)
do you have a good radio bezel for sale? black? how much? thanks!
$175 |
Shoot me a price on the Motors and let me know the miles on the clock for the 03 & 01
|
Originally Posted by cudamax
(Post 1584266204)
Shoot me a price on the Motors for the 03 & 01
|
What colors are the cars? I'm looking for a bumper for a navy blue metallic.
|
you arent far from me with that black Z06...what kind of shape are the mirrors in? sun visors? ...ill try to think of what all else I need. I really need a rocker panel...but it might be easier to just repair mine since they are glued on.
|
z06 mufflers??
|
How much for the fuel rail covers?
|
1 Attachment(s)
Originally Posted by mikeyrko
(Post 1584266283)
What colors are the cars? I'm looking for a bumper for a navy blue metallic.
Originally Posted by 93civEJ1
(Post 1584266312)
you arent far from me with that black Z06...what kind of shape are the mirrors in? sun visors? ...ill try to think of what all else I need. I really need a rocker panel...but it might be easier to just repair mine since they are glued on.
Originally Posted by Heimlich2010
(Post 1584266321)
z06 mufflers??
Originally Posted by BoostSlam
(Post 1584266356)
How much for the fuel rail covers?
|
headliner for frc?
|
Any LS1/LS2/LS3 Short or Long Blocks/Engine Assy's at all
|
Pass airbag and module text me at 7314392777
|
6 Attachment(s)
Originally Posted by gippy87
(Post 1584266627)
headliner for frc?
Originally Posted by cudamax
(Post 1584266670)
Any LS1/LS2/LS3 Short or Long Blocks/Engine Assy's at all
Thats all other than the 99 LS1 coming in w/122k. We have been selling motors as fast as we can get as of the last month or so. |
Did you have a targa top , Pewter in color?
|
Looking for a EBCM for 2000 without active handling.... Have one by chance?
|
Originally Posted by Marc@Vettenuts.net
(Post 1584267497)
We have some nice ones in stock however they are expensive to ship. Where are you located?
I have a LS1 short block with all Lunati rotating assembly. Fully forged and ready to go for $1950. Pics below. Thats all other than the 99 LS1 coming in w/122k. We have been selling motors as fast as we can get as of the last month or so. |
Good driver and passenger headlight bezels to 48348 please?
|
im in johnston RI. Im sure shipping is a bitch. Dont know if it meets the size requirements but ive had great success using grey hound to ship large items at great rates.
|
How much shipped for the plastic shroud that goes over radiator believe there is 2 pieces to it. I assume they fit a z06 even if they come off a coupe am I correct ? Zip is 79607
|
Mark I know its a long shot but did the Z06 window reveal molding get cracked? Both driver and passenger I need.
|
Need trunk release switch from the Z (just a trunk button and that is it), and I need a driver's seat belt (the retractor side, not buckle) from the 01. Prices with shipping to 68118 Omaha NE?
|
both headlight assemblies?
|
On the 03 Z06 does it have stock exhaust? you still have exhaust H-pipe with cats? If so how much ? and I will come pick up if price is right.
thanks |
Front brake calipers and brackets on the Z shipped to 92123?
|
I emailed you regarding the ignition switch. Let me know if available. Thanks!
|
parts
Black door panel, non dual hvac control, drivers non memory seat frame......??? I have a 98 vert
|
Was wondering if the drivers side seat is available? Mainly looking for the frame that bolts to the floor, need one with all the power to the seat.
|
hard to tell if those are silver or pewter....if so I am interested in pewter headlight covers
|
Looking for drivers side carpeting in black for my 99 vert
|
Both front fenders and front bumper cover, any color as long as nothing is cracked or tabs broke, light scratchs ok too, both front wheel house's if ya can get them off without cracking, and lastly the outside drivers side A-plier reveal moulding for a HARDTOP/Z06...all shipped to 48519. THANKS
|
How much for the body side molding for both passenger and driver's side if they are good from the '01 vert? shipped to 78665.
|
black z drivers door?? condition and price?
|
how much for driver side window regulator ? 93455
|
Originally Posted by turbovert04
(Post 1584267733)
Did you have a targa top , Pewter in color?
Originally Posted by thepitstop2010
(Post 1584267855)
Looking for a EBCM for 2000 without active handling.... Have one by chance?
Originally Posted by cudamax
(Post 1584267916)
Lets Talk Looks Good My Zip is 61080 Shrink Wrap that up & put my name on it. Any Info on that? or was it pulled from a Wreck?
Originally Posted by C5Conrad
(Post 1584267941)
Good driver and passenger headlight bezels to 48348 please?
Originally Posted by gippy87
(Post 1584267966)
im in johnston RI. Im sure shipping is a bitch. Dont know if it meets the size requirements but ive had great success using grey hound to ship large items at great rates.
Originally Posted by Noma01
(Post 1584268008)
How much shipped for the plastic shroud that goes over radiator believe there is 2 pieces to it. I assume they fit a z06 even if they come off a coupe am I correct ? Zip is 79607
Originally Posted by JMBLOWNWS6
(Post 1584268020)
Mark I know its a long shot but did the Z06 window reveal molding get cracked? Both driver and passenger I need.
We should be getting another Z soon. Shoot me an email and will add you the the will call list. Title the email Z06 window reveal molding. Email same as screen name.
Originally Posted by chevynovaguy72
(Post 1584268877)
Need trunk release switch from the Z (just a trunk button and that is it), and I need a driver's seat belt (the retractor side, not buckle) from the 01. Prices with shipping to 68118 Omaha NE?
Originally Posted by 9c1ny
(Post 1584268904)
both headlight assemblies?
Originally Posted by jirasvet
(Post 1584269125)
On the 03 Z06 does it have stock exhaust? you still have exhaust H-pipe with cats? If so how much ? and I will come pick up if price is right.
thanks
Originally Posted by MVP'S ZO6
(Post 1584269127)
Front brake calipers and brackets on the Z shipped to 92123?
Originally Posted by HBbadb0y
(Post 1584269135)
I emailed you regarding the ignition switch. Let me know if available. Thanks!
Originally Posted by Pewter1
(Post 1584269231)
Black door panel, non dual hvac control, drivers non memory seat frame......??? I have a 98 vert
Non dual HVAC control for $145 in very nice condition Non Memory seat track i think i have in stock will check for you.
Originally Posted by CoupeC5man
(Post 1584269267)
Was wondering if the drivers side seat is available? Mainly looking for the frame that bolts to the floor, need one with all the power to the seat.
Originally Posted by pewter99
(Post 1584269285)
hard to tell if those are silver or pewter....if so I am interested in pewter headlight covers
Originally Posted by LMDNC5
(Post 1584269343)
Looking for drivers side carpeting in black for my 99 vert
Originally Posted by Stang-etr96
(Post 1584269530)
Both front fenders and front bumper cover, any color as long as nothing is cracked or tabs broke, light scratchs ok too, both front wheel house's if ya can get them off without cracking, and lastly the outside drivers side A-plier reveal moulding for a HARDTOP/Z06...all shipped to 48519. THANKS
Send me an email at marc@vettenuts.net and i will get you over some prices.
Originally Posted by lmadern
(Post 1584269977)
How much for the body side molding for both passenger and driver's side if they are good from the '01 vert? shipped to 78665.
Originally Posted by willsy2kc5
(Post 1584270601)
black z drivers door?? condition and price?
Originally Posted by RAZ1999
(Post 1584271620)
how much for driver side window regulator ? 93455
|
any black sun visors in good condition? I need a pair
|
Are they all 3.15 no 3.42's?
How much shipped for a diff to 85658 Marana, AZ. Also I probably over looked it but miles on the Diff? |
Originally Posted by Bluesteve1
(Post 1584274026)
any black sun visors in good condition? I need a pair
Originally Posted by Cross
(Post 1584274353)
Are they all 3.15 no 3.42's?
How much shipped for a diff to 85658 Marana, AZ. Also I probably over looked it but miles on the Diff? One single rib 3.42 one the way in from the 99 Coupe w/88k for $695. All are plus shipping. |
Let me know how much shipped on one of the 3.15's Please.
|
Originally Posted by cross
(Post 1584274763)
let me know how much shipped on one of the 3.15's please.
|
Sold, out of those three are they all 3 rib or?
|
Originally Posted by Cross
(Post 1584274812)
Sold, out of those three are they all 3 rib or?
Thanks for the order, Marc 615-896-6100 |
3 Attachment(s)
Just pulled these from the 01 Coupe w/TPS and Michelin PS.
$1150 shipped |
Yeah I need the whole switch assembly minus the cylinder
|
Originally Posted by HBbadb0y
(Post 1584275142)
Yeah I need the whole switch assembly minus the cylinder
|
Marc I need a 3.73 3 rib diff, keep an eye out for one please?
|
Originally Posted by Marc@Vettenuts.net
(Post 1584273896)
We are sold out of targas, even the one coming in is already sold.
I will have the 99 here on Monday and it will fit your car if it is the M unit. I will test and see if its in good working condition. PM me Monday night to remind me. Pulled from a local car that was with light damage. Still ran and drove. It had stock heads as he ran out of money after the bottom was built. We have them in stock located on this page: Headlights and Components Measyre yours and call them to see if it will fit. I use them but would worry about the box as its transferred from bus to bus. I have a Greyhound a few miles from me. Correct same part. There is the upper shrous that sits on top, have one in stock for $85, then you have the large shroud that runs down the radiator for $45. Sold before the car came in. I do have 2 both cracked clean across. We should be getting another Z soon. Shoot me an email and will add you the the will call list. Title the email Z06 window reveal molding. Email same as screen name. $78 Shipped for all parts. From the Silver car $795 shipped. If you do not need motors i can deduct for that. We also have other colors in stock. We do have them in stock for $125. $196 shipped. You need the plastic surround? Have a very nice black driver door panel for $188 Non dual HVAC control for $145 in very nice condition Non Memory seat track i think i have in stock will check for you. We have one we pulled from the 01 Vert. Works perfect no rocking. What year is your car as it makes a difference. Memory, telescopic? They are silver. Have some very nice carpet for $115 shipped for the driver side. I have already sold the RH front fender. I have 2 LH's in stock, complete front bumper and yes we can pull the inner fender liners w/o damaging them. We are out of window reveal molding for the hardtop. Send me an email at marc@vettenuts.net and i will get you over some prices. $115 Shipped Condition from another car in black is is excellent. With or w/o mirror? Order here for $89.99: Window Regulator How do I pay? |
Originally Posted by MVP'S ZO6
(Post 1584275394)
How do I pay?
|
Awesome. PayPal sent. Shoot me a pm with tracking number when you ship it please.
Thanks! :cheers: |
[QUOTE=Marc@Vettenuts.net;1584266450]I have this front bumper pictured below pulled from an 00 with some scratches.
Sorry I didn't say I need a rear bumper for Nbm |
ttt
Marc, looking for a good frame & body to make a track car out of. Call me are give me a p.m. if you have something. Robert
|
[QUOTE=mikeyrko;1584276548]
Originally Posted by Marc@Vettenuts.net
(Post 1584266450)
I have this front bumper pictured below pulled from an 00 with some scratches.
Sorry I didn't say I need a rear bumper for Nbm |
Price and mileage for the transmission on the z06, may be getting mine rebuilt and want to see if theres a cheaper option. What comes with the trans ?
|
Originally Posted by robert miller
(Post 1584277228)
Marc, looking for a good frame & body to make a track car out of. Call me are give me a p.m. if you have something. Robert
|
Originally Posted by MVP'S ZO6
(Post 1584277279)
What are you upto now you crazy S.O.B. :cheers:
Will make up my mind after going to the track then in two weeks & see what the car is going to do with this stuff on it.. Robert |
I will take the Z06 carpet and back panel for $115.00 Please get me a shipping quote to NC 27265. Thank you.
|
Originally Posted by MVP'S ZO6
(Post 1584275613)
Awesome. PayPal sent. Shoot me a pm with tracking number when you ship it please.
Thanks! :cheers: |
Do you have the manual A/C control head unit (not dual climate)?
If so, how much shipped to 27560 NC? |
Originally Posted by Legacy Z06
(Post 1584277277)
Price and mileage for the transmission on the z06, may be getting mine rebuilt and want to see if theres a cheaper option. What comes with the trans ?
Originally Posted by robert miller
(Post 1584277228)
Marc, looking for a good frame & body to make a track car out of. Call me are give me a p.m. if you have something. Robert
Originally Posted by MVP'S ZO6
(Post 1584275613)
Awesome. PayPal sent. Shoot me a pm with tracking number when you ship it please.
Thanks! :cheers:
Originally Posted by JeremiahsC5
(Post 1584278586)
I will take the Z06 carpet and back panel for $115.00 Please get me a shipping quote to NC 27265. Thank you.
Originally Posted by robert miller
(Post 1584278671)
Buddy Marc great guy to deal with. I have gotten a few parts from him & also been down to his shop and picked up a few. Get that dam car of your up and going now.:lol::lol::lol::lol: Robert
Originally Posted by NOSLOW
(Post 1584278928)
Do you have the manual A/C control head unit (not dual climate)?
If so, how much shipped to 27560 NC? |
Which intake is on the Z, and what condition is it in?
|
Originally Posted by chasboy
(Post 1584279266)
Which intake is on the Z, and what condition is it in?
|
Payment sent on carpet
|
Need bracket for mounting the pass side driving/corner light...
|
Originally Posted by LMDNC5
(Post 1584281158)
Payment sent on carpet
|
Hey Marc, thank you for the tracking number. Super fast shipping.
Nice doing business with you!! |
I emailed you thru the forum Mark. Thanks
JMG |
Any chance you have a PCM mounting bracket?
|
If you are selling motors left and right quickly, how about some help selling my LS6 :D.
|
ttt
|
Originally Posted by STLSPARKY
(Post 1584282219)
Need bracket for mounting the pass side driving/corner light...
Originally Posted by chasboy
(Post 1584282876)
Is that the one in the pic? Also, is the license plate frame intact? -just the area around the plate.
Originally Posted by MVP'S ZO6
(Post 1584297161)
Hey Marc, thank you for the tracking number. Super fast shipping.
Nice doing business with you!!
Originally Posted by JMBLOWNWS6
(Post 1584297195)
I emailed you thru the forum Mark. Thanks
JMG
Originally Posted by GOTHAM VETTE
(Post 1584297638)
Any chance you have a PCM mounting bracket?
Originally Posted by Maxx_Z06
(Post 1584297706)
If you are selling motors left and right quickly, how about some help selling my LS6 :D.
|
2001, sent you an email as well
|
I am looking for 99 black seat bezer
|
Looking for a pair of seats. For 99 car manual is fine not sure if I have power for seats since it came with race seats
|
How much for the driver's side mirror on the silver car?
Charlie |
Damn fast shipping!! Thanks!!!!!!
|
How much for Rear Leaf Spring from the 03 ZO6 shipped to 53089?
Thanks, Chris |
Originally Posted by GOTHAM VETTE
(Post 1584298482)
2001, sent you an email as well
Originally Posted by Caveboy
(Post 1584298623)
I am looking for 99 black seat bezer
Originally Posted by 97C5inSD
(Post 1584299798)
Looking for a pair of seats. For 99 car manual is fine not sure if I have power for seats since it came with race seats
Originally Posted by cruisemon
(Post 1584301131)
How much for the driver's side mirror on the silver car?
Charlie
Originally Posted by Noma01
(Post 1584301914)
Damn fast shipping!! Thanks!!!!!!
Originally Posted by carp56
(Post 1584302096)
How much for Rear Leaf Spring from the 03 ZO6 shipped to 53089?
Thanks, Chris |
Need an EBCM for a 2000 with the "M" code (not active handling). Any chance you have a working one available? Thanks.
|
What kind of shape is the trunk lid on the Black Z06 in? How much?
|
Is that a vararam air bridge on the zo6?? If so is it available and how much??
|
Do you have any black seats and I don't need the power mounting frames?
Thanks |
Originally Posted by 00BlkVette
(Post 1584308633)
Need an EBCM for a 2000 with the "M" code (not active handling). Any chance you have a working one available? Thanks.
Originally Posted by PBone
(Post 1584308662)
What kind of shape is the trunk lid on the Black Z06 in? How much?
Originally Posted by poppop
(Post 1584309599)
Is that a vararam air bridge on the zo6?? If so is it available and how much??
Originally Posted by vanvettman
(Post 1584310547)
Do you have any black seats and I don't need the power mounting frames?
Thanks |
headlight cover bracket
looking for headlight cover bracket
|
I"m looking for the hazard light button with the connector on the back. Thank you.
|
How much for a A/C compressor with the bracket shipped to 77093
|
Yo Marc, I might be interested in the Z trunk lid if not taken!! Thks Wayne!!
|
does the z06 have a left side mirror without any issues and night dimming component? i don't know if the standard vette has the same side mirrors. need to replace my mirror because the chemicals are showing through during the day..
|
Do you have a LS1 steering rack? Need one ASAP for a conversion I'm doing.
Thx |
Originally Posted by boper66
(Post 1584314932)
looking for headlight cover bracket
Originally Posted by C5rst
(Post 1584316102)
I"m looking for the hazard light button with the connector on the back. Thank you.
Originally Posted by 9lives
(Post 1584317458)
How much for a A/C compressor with the bracket shipped to 77093
Originally Posted by fisher auto
(Post 1584317946)
Yo Marc, I might be interested in the Z trunk lid if not taken!! Thks Wayne!!
Originally Posted by directnosfogger
(Post 1584318179)
does the z06 have a left side mirror without any issues and night dimming component? i don't know if the standard vette has the same side mirrors. need to replace my mirror because the chemicals are showing through during the day..
Originally Posted by bdiddo
(Post 1584319464)
Do you have a LS1 steering rack? Need one ASAP for a conversion I'm doing.
Thx |
Originally Posted by Marc@Vettenuts.net
(Post 1584279067)
Tranny is in my car as i sent mine and my diff to RPM to be built. We will be getting them back soon and will also probably buy another z in the next few weeks if you can wait that long..
|
(On the 03 Z06 does it have stock exhaust? you still have exhaust H-pipe with cats? If so how much ? and I will come pick up if price is right.
thanks) Do you still have these ???? |
Price on the silver front bumper, also the headlight covers and left front fender shipped to 32778
|
Found the cords so how much for a pair of seats
|
Do u have the z06 side skirts still
|
Marc, can you get a pic here or fisherauto1@verizon.net how is the condition???
|
Quarter panel
I am looking for a left rear quarter panel in quicksilver for a conv. If you have one let me know shape it is in and price and phone # I can call and best time to call. Thanks, Tom
|
Drivers side outer A pillar and top plastic drip rail piece? From z06
|
Quote:
Originally Posted by 9lives How much for a A/C compressor with the bracket shipped to 77093 Ac compressor w/bracket $135 shipped. Does this come with both the idler pulley and belt tensioner? |
I'm am in the need for a passenger side manual seat slider bar, so I may be able to adjust the seat. I have heard that the C5 bar will fit in a C6. Do you have one? I just need the adjuster bar only but GM sells the seat rails with it. Would you sell just the slider bar?
Thank You |
All times are GMT -4. The time now is 01:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands