***New U.S. Made ZR1 Carbon Fiber Splitter $595 Shipped Group Buy!***
After several months of R&D we are pleased to announce the ZR1 Style Front Splitter from US1 Carbon is finally in production and available through American Hydrocarbon!! This is the first of many parts to be built for the Corvette.
**Coming soon: side skirts with rear flaps and rear spoiler ** Proudly made in the USA, we are an American owned and operated company - We do not outsource labor or materials to Mexico or Asia. We are bringing back American built parts for the American sports car one part at a time.:flag: All parts are 100% Solid Carbon Fiber, NOT Carbon Fiber over fiberglass. Manufactured with all epoxy resin, not polyester resin like some other manufacturers; Made from Prepreg Carbon Fiber and Autoclave cured. This production process makes a more consistent, stronger and lighter part. This same process is used in Aerospace and Racing. The splitter weighs in at an unbelievable 14.5 OUNCES before finish is applied - this is the difference in quality Autoclaved Carbon Fiber production. Compare before you buy!! Final topcoat is PPG Automotive clear coat for UV protection and show-quality finish. We are introducing this part with a group-buy for the First 10 units at the Forum Special of $595.00 with FREE SHIPPING to the lower 48. **After these ten are sold the regular price of $679.00 plus shipping will apply** Secure you spot on the list - Paypal link: https://www.paypal.com/cgi-bin/websc...=VT6PUK4SJ53BC http://i202.photobucket.com/albums/a...ps3a236c21.jpg http://i202.photobucket.com/albums/a...ps374fcb32.jpg http://i202.photobucket.com/albums/a...ps5480da6d.jpg http://i202.photobucket.com/albums/a...psc5e65e22.jpg http://i202.photobucket.com/albums/a...psda229a36.jpg http://i202.photobucket.com/albums/a...ps11533a9d.jpg http://i202.photobucket.com/albums/a...ps18d95009.jpg http://i202.photobucket.com/albums/a...ps5ae79f73.jpg http://i202.photobucket.com/albums/a...ps5d36e089.jpg |
Base C6 splitter is coming!!!
|
maybe I'm watching for the magic number.
|
For anyone on the edge, I was very happy with Pat and his parts! :thumbs:
|
Originally Posted by 5280Racer
(Post 1583480430)
maybe I'm watching for the magic number.
|
Question about the Weight...
I want to address a PM question that I received. The member asked about the weight being so light.
Carbon fiber manufactured correctly makes a very strong and lightweight part. That is why it is used in airplanes, race cars and a host of other applications where strength and weight are a big factor. The reason these are less than a pound is because the prepreg of the carbon cloth and curing in an autoclave is the best method to produce carbon fiber parts WITHOUT having to use fillers or a fiberglass backing which adds weight. Every layer is solid carbon. Almost all the other companies making carbon fiber parts are using a vacuum bag system which does not get the excess resin out of the material leaving you with added weight. Check out the weight of the other splitters out there for sale. |
Is your process more prone to cracking or less being so lightweight?
|
Originally Posted by Skol
(Post 1583489635)
Is your process more prone to cracking or less being so lightweight?
|
ZR1 Rear Spoiler coming soon!
We should have pics and pricing for the rear ZR1 spoiler next week!
|
100% Carbon Fiber Looks Like This...
If in fact the part is 100% carbon fiber the top and bottom should look the same.....things that make you go hmm?:willy:
Beware of imposters out there! http://i202.photobucket.com/albums/a...ps374fcb32.jpg http://i202.photobucket.com/albums/a...ps3a236c21.jpg |
How will the part be shipped?
Most of the large parts will go FedEx unless you want a different carrier.:thumbs:
|
Will there be any COMBO Sales?
Might do a splitter/side skirt combo later...
|
Get in now!!
Don't wait too long as this deal will not last forever!:D
|
See you in Ocala Saturday! 4/6
Palm Chevrolet on SR 200 off I-75 in Ocala Florida:thumbs:
|
Pat has always had great products and amazing customer service. Highly recommended (bought all my carbon fiber from him for my show car).
Pat - any chance of making the flaps for the front wheel to go in-between the back of the front wheel and the front edge of the skirts? I have been asking the previous vendor you used about this forever with no luck..... |
Have all 10 sold for the $595 price? What is the pricing for the splitter and side skirt combo?
|
Originally Posted by Skol
(Post 1583561579)
Have all 10 sold for the $595 price? What is the pricing for the splitter and side skirt combo?
Side skirts are not ready yet.... |
Starting to pull parts....take a look!
Here is a ZR1 splitter and spoiler just fresh out of the molds.
http://i202.photobucket.com/albums/a...ps7e0272af.jpg Here is what the splitter mold looks like. http://i202.photobucket.com/albums/a...s64b3affb.jpeg |
Is this for the Grand Sport?
|
Originally Posted by American Hydrocarbon
(Post 1583567221)
You can still get in for the splitter at $595.00
Side skirts are not ready yet.... |
All times are GMT -4. The time now is 02:06 AM. |
© 2024 MH Sub I, LLC dba Internet Brands