|
Originally Posted by BlueOx
(Post 1581188579)
OK, this has nothing to do with Rick Conti but I am going to ask a question I haven't heard anyone else ask.
Look closely at this picture, specifically at the transaxle area below the pipes under the car. Is that the same transaxle you have on your C6? It doesn't look like my '05. Is it maybe like your later model Vette? Mine has an anti-roll bar that is really obvious and this one doesn't. BTW, I can't really tell much about it otherwise than it has 7+ white LED-looking backup lights in the center of the tailights. CLICK on the bar above the pic to see it much larger. http://www.autotribute.com/wp-conten...7-spy-back.jpg maybe thats just me though |
Originally Posted by redvette77
(Post 1581183753)
Basically just a culmination of things we have heard. The LED lights can be seen on the mule on the videos. And I agree that masked and unmasked test cars should be running around tracks anytime now. Shouldn't be long before we see more of the car.
i dont remember seeing any |
Originally Posted by redvette77
(Post 1581205940)
Those "rectangular things" are simply part of the camo. The taillights may be shaped like that, and they may not. Way too early to worry too much about it.
|
Look for a upgrade to the NAV System with C7. Obvious need that will be addressed.
|
Originally Posted by jdhommert
(Post 1581208887)
where have we seen led's on the mule or even the jalopnik photos???
i dont remember seeing any
Originally Posted by JLinNY
(Post 1581209028)
Where do you get that from? They are clearly a part of the body as shown in the rendering.
|
Originally Posted by tuxnharley
(Post 1581262672)
Look at the pic in the post one above jdhommert and two above JLinNY. Sure looks like a round tail light lens with LEDs in it to me...........?
|
I cant tell with the camo over it but I think the rear lights are gonna look good on the vette! I cant wait until january! 5 more months!
|
Originally Posted by JLinNY
(Post 1581264218)
I'm not talking about the tail lights!! No one can see what it going on there. I am talking about those lower rectangular body parts on either side of the rear bumper cover. The ones that look just like what is shown in the jalopy rendering.
Last night I watched a cable show in part about the inner workings of the design team of a major auto maker. The attention to detail from initial sketches to final clay mule work-ups was extensive to the point of being almost absurd. With that, although the Jalopnik illustrators may be good drawers and got the basics right of what they saw (final production C7?), their rendition could have missed key, minute elements of what the C7 will be in only "a few hours". I hope so for our sake, please! :flag: |
Originally Posted by JLinNY
(Post 1581264218)
I'm not talking about the tail lights!! No one can see what it going on there. I am talking about those lower rectangular body parts on either side of the rear bumper cover. The ones that look just like what is shown in the jalopy rendering.
|
Originally Posted by redvette77
(Post 1581205940)
Those "rectangular things" are simply part of the camo. The taillights may be shaped like that, and they may not. Way too early to worry too much about it.
Originally Posted by JLinNY
(Post 1581209028)
Where do you get that from? They are clearly a part of the body as shown in the rendering.
Originally Posted by tuxnharley
(Post 1581262672)
Look at the pic in the post one above jdhommert and two above JLinNY. Sure looks like a round tail light lens with LEDs in it to me...........?
Originally Posted by JLinNY
(Post 1581264218)
I'm not talking about the tail lights!! No one can see what it going on there. I am talking about those lower rectangular body parts on either side of the rear bumper cover. The ones that look just like what is shown in the jalopy rendering.
|
| All times are GMT -4. The time now is 05:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands