CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C4 General Discussion (https://www.corvetteforum.com/forums/c4-general-discussion-34/)
-   -   Pics of z06 wheels on c4 (https://www.corvetteforum.com/forums/c4-general-discussion/2832085-pics-of-z06-wheels-on-c4.html)

kimmer 05-08-2011 04:03 PM

Pics of z06 wheels on c4
 
Would like to see some pics of Z06 wheels on a c4, staggered 17-18.

Keystring 05-08-2011 05:52 PM


Originally Posted by kimmer (Post 1577559810)
Would like to see some pics of Z06 wheels on a c4, staggered 17-18.

Not my car, but here ya go. Don't know if they are staggered or not though.

http://www.ksl.com/emedia/its/slc/20...r=ksl/gallery3

Jbyrd43 05-08-2011 06:57 PM

http://img830.imageshack.us/img830/3...8059017642.jpg

Roocars 05-08-2011 08:34 PM

My 88 with ZO6 motor sport wheels if this works.
Brian


http://forums.corvetteforum.com/pict...ictureid=78737

RockG 05-08-2011 09:24 PM


Originally Posted by Jbyrd43 (Post 1577560850)

What size are these?

xole 05-08-2011 10:03 PM

Z06 Motorsports 18" all the way around non-staggered.

http://img.photobucket.com/albums/v1...te/wheels1.jpg

Jbyrd43 05-08-2011 10:17 PM


Originally Posted by RockG (Post 1577562078)
What size are these?

17 x 9.5 Front 18 x 10.5 rear

TA 05-09-2011 08:16 AM

1 Attachment(s)
Here's 88blackZ-51's car with OEM C5 Z06 wheels :cool:

Attachment 48152429

Bubba91 05-09-2011 12:30 PM

1 Attachment(s)
18"s all around. I think 18" front and 19" rear would look better. I just did the same all around to allow for rotation.
Attachment 48152428

Jbyrd43 05-09-2011 02:31 PM


Originally Posted by Bubba91 (Post 1577566761)
18"s all around. I think 18" front and 19" rear would look better. I just did the same all around to allow for rotation.
http://img.photobucket.com/albums/v2...e/IMG_4217.jpg

I agree, I wish I would have went 18 and 19

rob-cyn 05-09-2011 04:34 PM


Originally Posted by TA (Post 1577564606)
Here's 88blackZ-51's car with OEM C5 Z06 wheels :cool:

http://i195.photobucket.com/albums/z...1/Vette009.jpg

Those look killler

Otis S. 05-09-2011 04:54 PM

Dammit I need to get my wheels on.

Churchkey 05-09-2011 05:09 PM

Same as Bubba91 but on a 90 with 45 sidewalls.

http://i863.photobucket.com/albums/a...hurchkey/1.jpg

gkrynick22 05-09-2011 05:13 PM

2 Attachment(s)
Here are my stock C5 Gunmetal Z06 wheels on my car. By far my favorite wheels, 17's in the front and 18's in the back. :cheers:

JDM23 05-09-2011 08:28 PM

I know I have asked to question before, but honestly how is the handling and acceleration difference compared to the original wheels. 17 or 18's or both.. Also what was needed to get the factory Z06 wheels to fit?

Otis S. 05-09-2011 09:16 PM


Originally Posted by JDM23 (Post 1577570872)
I know I have asked to question before, but honestly how is the handling and acceleration difference compared to the original wheels. 17 or 18's or both.. Also what was needed to get the factory Z06 wheels to fit?

I cannot say from experience, my z06 wheels are sitting in the garage until I need new tires, but I couldn't imagine much of a difference acceleration wise. Might be a slight difference from the weight saving but that would be it. They might help handling, if you can get wider tires than what you are running now. As far as fit they will bolt right up. No adapters or anything needed.

Jbyrd43 05-09-2011 10:36 PM


Originally Posted by JDM23 (Post 1577570872)
I know I have asked to question before, but honestly how is the handling and acceleration difference compared to the original wheels. 17 or 18's or both.. Also what was needed to get the factory Z06 wheels to fit?

Accleration- I felt no difference
Handling- Since I had 17 stock all the way around, just moving up to 18 in the back didn't do anything. However, in my supra I went from 15 or 16s, cant remember, to 18s and it was a massive difference.

The replicas fit from http://www.oewheelsllc.com/Corvette-Wheels/c304233/

I believe that for factory ones need spacers, but im not 100%

5abivt 05-10-2011 11:42 PM


Originally Posted by Bubba91 (Post 1577566761)
18"s all around. I think 18" front and 19" rear would look better. I just did the same all around to allow for rotation.
http://img.photobucket.com/albums/v2...e/IMG_4217.jpg

Staggered do not belong on a c4 it totally ruins the styling of the car. I was wiping the tears from my eyes until I saw 88z51s and this red one. Red one is Lowered nicely too :thumbs::thumbs:

CREWZIN 05-11-2011 07:10 PM

2 Attachment(s)
Not staggered, 17 all around.

Attachment 48152418


Attachment 48152419

Hendrick SS 05-15-2011 11:26 PM

Wow!
 
All I can say is these cars look great with the Z06 wheels. I didn't know what type of wheels I wanted and now it's clear, the Z06 wheels for me.

I plan on picking a set up this week, and I will post pictures after the install.

Great looking cars.


All times are GMT -4. The time now is 04:41 AM.


© 2024 MH Sub I, LLC dba Internet Brands